Re: Programa De Actualizacion A Windows 10 Tech Bench
Ayana Munsen
i just bought a arduino for school but i can't install the program from the site.
i download it then unzipt it clicked the .exe the splash screen comes but than nothing happens.
i'm running windows 7 (64bit) a quad core (2.33GHz) 4 GB of RAM
i even reinstalled java but that also didn't work out.
downloaded the previous version didn't work either.
hi
when i plugged it in it said new hardware found then i installed the drivers and now i doesn't say that anymore
i'm using the arduino UNO i think i installed the right driver because my computer detects it as a arduino UNO
and i did check the troubleshoot first, but could't find anything
I have just recently started working with the Arduino Uno myself on Windows 7 / 64 bit and at first I had trouble getting everything to take off and fly too. I went to the Arduino Home page and downloaded the 0022 version for Windows 7 and even after that there where hang ups. I would indicate new found hardware but would not load up. I went to device manager and now that it has been several days since I started working with this, my memory fails me on how I finally got the program to load up, it seem to me that my computer opened ' the software may not have installed correctly ' and asked to send an error report to Microsoft and was searching for a solution to the problem, I have had a lot of that lately. One thing that I do remember is that my open task in the tool bar got closed by some action that I don't think I did and I had more troubles reopening Arduino files. I just kept going to any and every link and working through the device and task managers until I found the one that opened the program and now I make sure that I don't close it out, only minimize it. I will go back and retrace my tracks to see if I can get my system to repeat what yours is doing, when I did finally get my program to load and communicate, I got an automatic, Com-port 4 and I can verify that Windows 7 will run your Arduino, but you may not be able to get the sketch page to load like everyone else's on screen display, at least I have not gotten it to yet. The sketch is all in one long string at the top of the page, which makes it hard to view and review what you load into the program. I have added a post about this else where but if anyone has had this happen to them. Here is another bit of info, First I must ask if you got the book getting started with Arduino? If so, where is tells about installing the program onto the hard drive, all the instructions are for XP or Vista, there are not instruction for Windows 7 period! It will not load up the same way as in older OS's. Windows 7 is different in Device Manager files. If you do have the book, go to the trouble shooting chapter in the back and follow the instructions up to the part on setting the com-port, you should get a low number somewhere in between 3 and 7, I got 4, do this before you connect the USB cable to the Arduino and make sure the Baud rate is 9600, (default setting) like I said earlier, it may take a little key tapping to find the right sequence but when you do, you will get the right window open and get to the next step in installing and connecting, that means communicating with Arduino also, once the window opens that tells you to connect the Arduino you are set to go. I have to tell you that it states in the manual in the trouble shooting section that you may have problems using Arduino IDE, particularly on Windows! They should tell you these things before you give up your money! And they should print more and better instructions. I had my doubts whether I could run Arduino on 7 before I spent any money, but decided to chance it and got lucky, I have lots of old programs I use to run on XP and now they are useless to me on this computer, what to do? I have a New/Old HP Printer that should print both sides of the page but won't work with Windows 7
Initially it said there was a problem adding the device driver (like you said "the software may not have installed correctly") so I tried to install it. You certainly had to fight the operating system to do that. Eventually I managed, but it was not easy. You should be able to see under "Devices and printers" (isn't the printer a device?) something like in the attached screenshot.
I have first edition copy write 09. Yes, you have to fight the OS to get Arduino loaded, it says that in the book! I have read other posts from members tonight about the same issue, most indicate that Windows 7 will automatically select Comport 4 once you get past the road block to installing program into Windows 7. Like you say, user friendly? Sometimes yes more times No! Have my old desktop tower with XP still, it will become my main system for the work bench soon as I get it debugged, spent much time in computer shop and still did not get fixed! As they say, if you want something done right, do it yourself! I have learned much since then and still need to learn volumes, that system was my first functional computer and I assembled it myself from parts. I have a several of other computers with Windows 9X, ME, XP desktop and laptop, someday I will have one with multiple OS's and would like to have MAC system too, maybe then I would not have to fight with getting programs to run when Micro soft decides to improve.
Installing drivers for the Arduino Uno with Windows7, Vista, or XP:
_ * Plug in your board and wait for Windows to begin it's driver installation process. After a few moments, the process will fail, despite its best efforts_
_ * Click on the Start Menu, and open up the Control Panel._
_ * While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager._
_ * Look under Ports (COM & LPT). You should see an open port named "Arduino UNO (COMxx)"_
_ * Right click on the "Arduino UNO (COmxx)" port and choose the "Update Driver Software" option._
_ * Next, choose the "Browse my computer for Driver software" option._
_ * Finally, navigate to and select the Uno's driver file, named "ArduinoUNO.inf", located in the "Drivers" folder of the Arduino Software download (not the "FTDI USB Drivers" sub-directory)._
_ * Windows will finish up the driver installation from there._
See also: step-by-step screenshots for installing the Uno under Windows XP.
Installing drivers for the Arduino Duemilanove, Nano, or Diecimila with Windows7, Vista, or XP:
When you connect the board, Windows should initiate the driver installation process (if you haven't used the computer with an Arduino board before).
On Windows Vista, the driver should be automatically downloaded and installed. (Really, it works!)
On Windows XP, the Add New Hardware wizard will open:
_ * When asked Can Windows connect to Windows Update to search for software? select No, not this time. Click next._
_ * Select Install from a list or specified location (Advanced) and click next._
_ * Make sure that Search for the best driver in these locations is checked; uncheck Search removable media; check Include this location in the search and browse to the drivers/FTDI USB Drivers directory of the Arduino distribution. (The latest version of the drivers can be found on the FTDI website.) Click next._
_ * The wizard will search for the driver and then tell you that a "USB Serial Converter" was found. Click finish._
_ * The new hardware wizard will appear again. Go through the same steps and select the same options and location to search. This time, a "USB Serial Port" will be found._
You can check that the drivers have been installed by opening the Windows Device Mananger (in the Hardware tab of System control panel). Look for a "USB Serial Port" in the Ports section; that's the Arduino board.
hi
first of tnx for the reply's
second my computer see's the arduino (see screenshot) so i think it is some kind of a software problem
i tried the compatibility mode on windows xp (servicepack 3) didn't work either
i really have no idea what to do right now so all suggestions are welcome
i'm not entirely sure or this is what you meant but i have made a screenshot of it.
i tried it with 2 techniques with the administrator rights from the start menu and with the shift key right click and then open command window here.
both without success, i'm not getting back any kind of error just the splashscreen and then nothing.
En la parte inferior de la web seleccionamos Windows 10 (se descargar la versin Home y Pro en la misma ISO), al confirmar este paso seleccionamos el idioma, en nuestro caso Espaol aunque si fuera necesario podramos descargarlo en otro idioma. Por ltimo, segn la estructura del CPU, 32 o 64 bits y comenzar la descarga. (entre 4GB y 6GB segn la estructura)
Para crear una unidad USB TechBench de Windows 10 con diferentes estructuras (32 o 64) o diferentes idiomas y as reducir el nmero de USBs en nuestra rea de trabajo primero necesitamos una unidad de memoria USB de gran tamao (tanto como imgenes queramos montar) y descargar desde la web oficial las imgenes que necesitamos.
Si un usuario requiere de el servicio posventa para instalar Windows 10 con un equipo con Windows 7 o Windows 8.1 recomendamos tratar con cuidado los archivos personales y tratar los datos dentro del marco de la confidencialidad.
Insertamos la unidad Techbench que hemos creado anteriormente y hacemo doble clic sobre la techbench.cmd. Este Power Shell instalar un programa que al reiniciar evaluar y comprobar el equipo donde se va a instalar Windows 10. Una vez haya realizado la evaluacin del hardware y software nos indicara en color verde que podremos actualizar sin ningn problema. En amarillo, algn software necesita actualizar o desinstalada. En naranja algunas apliaciones o hardware no funcionar correctamente y en caso de instalar Windows 10 ste lo bloquear. Un resultado en rojo no puede actualizar a Windows 10 para ello se tiene que chequear el hardware del PC y actualizar drivers en tal caso. Si se actualiza con resultado en rojo la experiencia de usuario no ser la esperada por ello no recomendamos dicha actualizacin.
d3342ee215