Aw Rp150 Manual

0 views

Skip to first unread message

Kelsi Corsi

unread,

Aug 4, 2024, 3:01:52 PM8/4/24

to stocacknowsa

Thegeneral-purpose I/O controllers offer 8/16 inputs and 8/16 outputs, all electrically separated with quality relays and optocouplers. GPO is implemented with relays shorting to GND. GPI implemented with optical isolators shorted to GND.

Please notice: SKAARHOJ Controllers with GPI inputs accept open collector and relay outputs (pulled to GND). The default HD15 tally connector on the TriCaster TC1 does not provide a direct working signal to the ETH-GPI Link. Converting the 5V potential to GND is needed.

In this setup the ETH-GPI Link will connect to the ATEM Switcher + the TriCaster and via Virtual Hardware Components on the ETH-GPI Link translate Program/Preview states to the ATEM so the two switchers are in sync.

By using the "Hold Group" feature found in Device Cores such as Blackmagic ATEM + VideoHub and AJA KUMO Routers, RCP Touchdown function can be used. The Hold Groups feature will fall back to a previous source for a group of triggers using a queue system and finally to the first previous value before any trigger in the group was activated.

We have a Device Core for the AW-RP120/AW-RP150 which can perform routing control without the need of a GPI cable. Check out the manual for the Device Core and the default config: Panasonic AW-RP1xx on the ETH-GPI Link.

A example sketch utilising the "UniSketch Raw Panel" Device Core by using sytem action such as "UniSketch Raw Panel: Flag". To be used in combination with "2x8 GPIO TCP Server" configuration to link two SKAARHOJ controllers together.

An example sketch utilising the "TCP Server" Device Core by using sytem action such as "System: Flag" with Feedback Flag settings as well. To be used in combination with "2x8 GPIO UniSketch TCP Client" configuration to link two SKAARHOJ controllers together.

Configuration using the "In1-4 Binary" component to do ATEM AUX routing based on GPI from the Panasonic AW-RP50 and AW-RP120. Routing actions can be changed to Blackmagic VideoHub, AJA KUMO Router and more.

A example configuration for routing with the Panasonic AW-RP1xx. Configuration performs source selection on a Blackmagic ATEM Switcher for AUX Channel 1-2 by utilizing Virtual Hardware Components. Sets sources 1-10 on AUX1 for Panasonic Group 1. Sets sources 11-20 on AUX2 for Panasonic Group 2. Routing actions can be changed to include additional groups or to perform routing on Blackmagic VideoHub, AJA KUMO Router and more. Control via IP.

A example configuration for routing with the Panasonic AW-RP1xx. Configuration performs a video routing on AJA KUMO Routers by utilizing Virtual Hardware Components. Routes camera 1-10 for Input 1-10 to Output 1 on the KUMO. Routing actions can be changed to include additional groups or to perform routing on other Device Cores. Control via IP.

An example configuration for routing with "Joystick Override". This is used for RCPs connected to a VideoHub where you want to keep track of the order of GPI INs in a queueing system and let routing fallback accordingly. The "Hold Group x" action is used for routing instead of just "Hold Down". When no GPIs are held down the routing will fall back to whichever routing the VideoHub had before GPIs where triggered. In other words it is not set in this config.

An example configuration for routing with "Joystick Override". This is used for RCPs connected to a VideoHub where you want to keep track of the order of GPI INs in a queueing system and let routing fallback accordingly. The "Hold Group x" action is used for routing instead of just "Hold Down". When no GPIs are held down the routing will fall back to the routing set in "Virtual 1" (Input 16 to Output 1).

An example configuration for routing with "Joystick Override". This is used for RCPs connected to a KUMO where you want to keep track of the order of GPI INs in a queueing system and let routing fallback accordingly. The "Hold Group x" action is used for routing instead of just "Hold Down". When no GPIs are held down the routing will fall back to the routing set in "Virtual 1" (Input 16 to Output 1).

A system for a PTZ operator with 2 x SmartView Duo monitors and 1 x SmartView 4K monitor. ATEM provides tally and the AW-RP120/AW-RP150 is used for PTZ control. The goal is to get tally on the monitors from the ATEM and on the SmartView 4K tally should only be enabled when a selected camera on the AW-RP120/15 matches the same camera in the ATEM. Routing to the SmartView 4K based on selected camera on the AW-RP120/15 is not part of this configuration. Please see for a Tutorial PDF

This video will be a real unboxing session taking a completely fresh ETH-GPI Link and connect it to a KUMO router. You will see how all configuration works from scratch, with global/online updates, then local updates and even how to add multiple actions to a single GPI trigger input.

This advanced SKAARHOJ UniSketch session is using Virtual Hardware components and synthesized triggers to provide basic protocol conversion between connected devices. The selected camera on a Panasonic RP-150 is detected and used to execute a route on a Videohub.

License

Advanced SKAARHOJ UniSketch training session detailing more about Virtual Hardware components and synthesized triggers to integrate a Panasonic RP-150 controller with a Blackmagic Design ATEM switcher, VideoHub, and SmartView monitor tally borders.

@manualsplus YouTubeManuals+,Privacy PolicyThis website is an independent publication and is neither affiliated with nor endorsed by any of the trademark owners. The "Bluetooth" word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The "Wi-Fi" word mark and logos are registered trademarks owned by the Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation with or endorsement.

Apabila Carmudian ingin Baleno manual, bisa memilih model keluaran sebelum 2023. Namun, untuk versi barunya mungkin sudah tidak tersedia lagi di diler. Salah satu pilihannya, yaitu membeli Baleno bekas.

Di situs web jual beli mobil bekas Carmudi, terdapat banyak pilihan Baleno bekas dengan transmisi manual. Tahun produksinya beragam, jika ingin membeli yang masih muda dan harganya terjangkau bisa pilih keluaran 2019.

Baleno bekas manual 2019 termurah banderol tepatnya Rp149,5 juta. Harga yang ditawarkan oleh Sales Agent di Duren Sawit, Jakarta itu berlaku untuk Carmudian yang membelinya secara dicicil atau kredit.

Si penjual dalam kolom catatan menyebut, konsumen yang membeli Baleno berwarna merah ini akan mendapatkan berbagai keuntungan, antara lain gratis asuransi, gratis detailing, garansi full 12 bulan (mesin, transmisi, AC), dan lulus inspeksi 175 titik.

Sementara itu, untuk Suzuki Baleno bekas manual 2019 termahal dibanderol Rp170 juta. Penjualnya yang berada di Sidoarjo, Jawa Timur tidak menyebutkan apakah harga tersebut berlaku untuk pembelian kredit atau tunai.

Mobil generasi keempat ini dibekali MID (Multi-Information Display) yang lebih informatif bagi pengendara, serta fitur-fitur lain seperti Auto Climate Control yang dapat memudahkan pengendara dalam menentukan tingkat temperatur di kabin.