Energy Star 3.0

[Grethe Presnar]

EnergyStar (trademarked ENERGY STAR) is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency.[4] The program provides information on the energy consumption of products and devices using different standardized methods. The Energy Star label[5] is found on more than 75 different certified product categories, homes, commercial buildings, and industrial plants. In the United States, the Energy Star label is also shown on the Energy Guide appliance label of qualifying products.

Elements of the Energy Star Program are being implemented in Japan, Taiwan, and Switzerland, as well as by Energy Star Canada.[6] In 2018, a 15-year long agreement with the European Union[7] expired. A previous agreement with the European Free Trade Association[6] has expired.

The Energy Star program was established by the Environmental Protection Agency in 1992 and operates under the authority of the Clean Air Act, section 103(g), and the 2005 Energy Policy Act, section 131 (which amended the Energy Policy and Conservation Act, section 324).[8][9][10] Since 1992, Energy Star and its partners are estimated to have reduced various energy bills by at least $430 billion.[11]

The EPA manages Energy Star products, as well as home and commercial/industrial programs. The EPA develops and manages Energy Star Portfolio Manager, an online energy tracking and benchmarking tool for commercial buildings. The DOE manages Home Performance with Energy Star and provides technical support, including test procedure development for products and some verification testing of products.[12]

Initiated as a voluntary labeling program designed to identify and promote energy efficient products, Energy Star began with labels for computer and printer products. In 1995 the program was significantly expanded, introducing labels for residential heating and cooling systems and new homes.[13] In 2000, the Consortium for Energy Efficiency was directed by members to begin an annual survey of Energy Star impact.[14]

Energy Star 4.0 specifications for computers became effective on July 20, 2007. The requirements are more stringent than the previous specification and existing equipment designs can no longer use the service mark unless re-qualified. They require the use of 80 Plus Bronze level or higher power supplies. Energy Star 5.0 became effective on July 1, 2009.[16] Energy Star 6.1 became effective on September 10, 2014. Energy Star 7.1 became effective on November 16, 2018.[17] The Version 8.0 specification for computers was finalized on October 15, 2019 and became effective on October 15, 2020.[18]

The EPA released Version 1.0 of the Computer Server specifications on May 15, 2009. It covered standalone servers with one to four processor sockets. A second tier to the specification adding active state power and performance reporting for all qualified servers, as well as blade and multi-node server idle state requirements became effective December 16, 2013.[19] The Version 2.0 Energy Star specification for Computer Servers came into effect on December 16, 2013. The Version 3.0 Energy Star specification for Enterprise Servers came into effect on June 17, 2019 [1].

As of early 2008, average refrigerators need 20% savings over the minimum standard. Dishwashers need at least 41% savings. Most appliances as well as heating and cooling systems have a yellow EnergyGuide label showing the annual cost of operation compared to other models. This label is created through the Federal Trade Commission and often shows if an appliance is Energy Star rated.[20] While an Energy Star label indicates that the appliance is more energy efficient than the minimum guidelines, purchasing an Energy Star labeled product does not always mean one is getting the most energy efficient option available. For example, dehumidifiers that are rated under 25 US pints (12 L) per day of water extraction receive an Energy Star rating if they have an energy factor of 1.2 (higher is better), while those rated 25 US pints (12 L) to 35 US pints (17 L) per day receive an Energy Star rating for an energy factor of 1.4 or higher. Thus a higher-capacity but non-Energy Star rated dehumidifier may be a more energy efficient alternative than an Energy Star rated but lower-capacity model.[21] The Energy Star program's savings calculator has also been criticized for unrealistic assumptions in its model that tend to magnify savings benefits to the average consumer.[22]

Another factor yet to be considered by the EPA and DOE is the overall effect of energy-saving requirements on the durability and expected service life of a mass-market appliance built to a consumer-level cost standard. For example, a refrigerator may be made more efficient by the use of more insulative spacing and a smaller-capacity compressor using electronics to control operation and temperature. However, this may come at the cost of reduced interior storage (or increased exterior mass) or a reduced service life due to compressor or electronic failures. In particular, electronic controls used on new-generation appliances are subject to damage from shock, vibration, moisture, or power spikes on the electrical circuit to which they are attached. Critics have pointed out that even if a new appliance is energy efficient, any consumer appliance that does not provide customer satisfaction, or must be replaced twice as often as its predecessor contributes to landfill pollution and waste of natural resources used to construct its replacement.[23]

Energy Star qualified televisions[25] use 30% less energy than average. In November 2008, television specifications were improved to limit on-mode power use, in addition to standby power which is limited by the current specifications. Standby power consumption for televisions must be 3 watts or less.[26] A wider range of Energy Star qualified televisions will be available.

The Energy Star Program Requirements for Imaging Products are focused on product families such as electrophotographic (EP) printers, inkjet printers (e.g., thermal), copiers, facsimile machines and other imaging equipment including MFD's (multifunctional devices). Typical Electrical Consumption (TEC) of a product family are measured and reported against an allowance set by the maximum throughput of the device. Operation modes (OM) are measured and reported for devices such as inkjet products against an allowance set by the functions present in the EUT (equipment under test). Devices that included "adders" such as Ethernet, on-board memory, wireless, etc. are mathematically "added" to increase the OM allowance. On February 1, 2011, the EPA/DOE added the requirement that all products registered under the Energy Star service mark, must be tested by an AB (Accredited Body) or CB (Certification Body) Laboratory.

The Energy Star is awarded to only certain bulbs that meet strict efficiency, quality, and lifetime criteria. Energy Star qualified fluorescent lighting uses 75% less energy and lasts up to ten times longer than normal incandescent lights.[27]

New homes or apartments that earn the Energy Star label have been verified to meet energy efficiency requirements set by U.S. EPA. Energy Star certified homes are at least 10% more efficient than homes built to code and achieve a 20% improvement on average, while providing homeowners with better quality, performance, and comfort.[31] Nearly 1.9 million Energy Star certified homes and apartments have been certified to date.[31] These high-performing homes can be found across the U.S. and include a complete thermal enclosure system, a high-efficiency heating, ventilation and cooling system, a comprehensive water management system, and energy-efficient lighting and appliances.[32] Together, U.S. homeowners living in certified homes saved $360 million on their energy bills in 2016 alone.[33] In 2020, ENERGY STAR separated single-family and multifamily construction types into their own programs: Single-Family New Construction (SFNC) and Multifamily New Construction (MFNC).[34]

A new tier of ENERGY STAR certification, called the ENERGY STAR NextGen Certified Homes and Apartments, will be launched in 2023. This new certification uses a baseline of the ENERGY STAR Single-Family and Multifamily certification, with additional requirements such as heat pump water heaters and EV-ready charging capabilities.[35]

The Energy Star program has developed energy performance rating systems for several commercial and institutional building types and manufacturing facilities. These ratings, on a scale of 1 to 100, provide a means for benchmarking the energy efficiency of specific buildings and industrial plants against the energy performance of similar facilities. The ratings are used by building and energy managers to evaluate the energy performance of existing buildings and industrial plants. The rating systems are also used by EPA to determine if a building or plant can qualify to earn Energy Star recognition.[36] In 2020 Energy Star released an updated guide for verifying Energy Star certifications.[37]

Energy Star ratings have been compared to other clean energy rating systems and green building certification systems such as those by independent firms like MiQ, or LEED certifications for office buildings.[38]

The number of space types that can receive the energy performance rating in Portfolio Manager is expanding and now includes housing,[39] bank/financial institutions, courthouses, hospitals (acute care and children's), hotels and motels, houses of worship, K-12 schools, medical offices, offices, residence halls/dormitories, retail stores, supermarkets, warehouses (refrigerated and non-refrigerated), hotels .mw-parser-output div.crossreferencepadding-left:0(see hotel energy management), data centers, senior care facilities, and wastewater facilities.[40][41]

Energy Star energy performance ratings have been incorporated into some green buildings standards, such as LEED for Existing Buildings. In the U.S., builders of energy efficient homes are able to qualify for Federal Income tax credits and deductions.[44]

3a8082e126