Re: Malwarebytes Activation Keygen For Windows
Mina Delahoussaye
A few weeks ago, update KB5031455 failed on both of these. I just put it down to a problem with the update itself. The update would install itself, but after 30% the PC would reboot (normal so far) and then it would fail rather than finishing the update - and reboot again. Then, after a third reboot, it gave a weird "something's gone wrong here" message. (see screenshot)
Then yesterday the same thing happened with a newer update KB5032190. Again this happened on both of my boot partitions, so I knew it wasn't a bad update, and it was caused by something in common to both boot partitions.
After wasting the better part of a day, and reinstalling Windows 11 (it doesn't overwrite any settings or data - just takes a long time) and trying various other fixes that I found online - I tried disabling Malwarebytes. Everything worked OK after this and the update installed on both partitions.
I'll be doing this until I hear that this issue has been resolved - as it is a real PIA (and time waster) to wait for the update to fail and then to roll back and fix itself - which requires 4-5 more reboots.
MalwareBytesPremium 4.6.6 bricked the Nov 14 Windows 11 update on my Framework laptop. Took me awhile to figure out that it was the culprit here. One solution was to uninstall MalwareBytesPremium entirely and then install the windows 11 update, however that too failed. Had to redo system ID Finally reinstall MalwareBytes afterwards. A real PITA.
We have the same problem in a company with approx. 1000 client computers.
I think Malwarebytes is not aware of the extent of the problem. It is extremely time-consuming to apply this workaround (which also works for us) to every computer.
If malwarebytes does not take such things seriously in the future we will have to refrain from further cooperation with malwarebytes as we have had frequent problems with malwarebytes in the past which have cost us a lot of time.
This link is not for Consumer products. Creating a Business Ticket for the Consumer Product will actually take much longer to get a response as it will be re-queued to the back of the line in the Consumer Support area.
I've been hit by this as well as a friend who has the same Lenovo V15 laptop. Each restart takes about 30 minutes of repeated reboots before it gets back to the desktop. I've removed MWB and I'm trying the update again.
I've just installed the same - it installed fine but it's broken some other software I use (Seadrive/Seafile). Ho hum! Not MWB problem though. Thank goodness I regularly image my laptop using Macrium Reflect.
This is effecting Threatdown business users as well. It's a shame with how big companies can be, we don't have time to be uninstalling malwarebytes from each computer and run updates and than reinstall malwarebytes after. Malwarebytes should have patched and fixed this problem but we are still feeling the effects a month later with some end user's computers. Honestly unacceptable
I don't think this has anything to do with "...how big companies can be..." but is a side effect of the complexity of software interactions. Is is the "chaos" that is introduced. In this case, Chaos and Complex Systems in a Computing Platform theorem.
I thought you were taking to the original poster here or me but yes, that sounds like a business ticket should be raised. I always found them very responsive when I was IT manager at my last company where we used MWB commercially.
To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.
No at least as far as I can find. The setting is a Windows Defender thing. Defender is designed to turn itself off whenever another AV is installed and registers in the security center because you should not run more than one AV. The catch is, Malwarebytes is not an actual AV in the same sense that the other AV companies classify theirs. It is classed as a replacement but retains the ability to run alongside them as well therefore the optional setting to "not register" in the security center.
Porthos: I'm a bit confused by this. I'm running the latest version of Malwarebytes Premium on the latest version of Windows 10 and I have Malwarebytes configured to register with the Windows Security Center. I don't see any evidence that Windows Defender is disabled. It's in my system tray with a green checkmark and the security dashboard shows everything green. Windows Defender still runs its scans. Both products looks like they're coexisting. What would I see to indicate Defender is disabled?
I believe Windows Defender only disables itself in the most recent builds/updates of Windows 10, so if you don't have the latest version/patch installed, it is possible that it is following a past behavior of not automatically disabling itself.
I don't see any evidence that Windows Defender is disabled. It's in my system tray with a green checkmark and the security dashboard shows everything green. Windows Defender still runs its scans. Both products looks like they're coexisting. What would I see to indicate Defender is disabled?
This what it looks like when Defender is off because Malwarebytes is registered in the security center. Defenders real-time protection is off and you only have an option for periodic scanning and even that is off by default in Defender.
I wish on install, there would be a check-mark/toggle in the installer to choose if Malwarebytes will the default antivirus provider or not. It would save us from having threads like this and in my opinion leaving the computer less protected because it turns off Defender by default on a new install because people do not realize Defender has just been DISABLED..
Porthos: Thank you for clearing this up for me. I just assumed (whoops!) that the green checkmark on the Defender icon meant it was active; when I checked further, I could see that it was not. I now have Malwarebytes set to not register itself with the Windows Security Center. And I am running the same Windows version and build as you.
My issue for others, especially new users is, Is that Defender has come a long way and there is little to no warning that Malwarebytes turns it off. Many security forum members are pushing Defender as all you need. For some I agree and have a few of those type clients. but for others, Case in point, I had a client call me Saturday who said MB blocked a link in a "Amazon" email and when I looked and saw the email I knew it was fake and I showed her the signs. It did look convincing but if she did not have MB she would have been PHISHED for her Amazon username and password.
I found the official Microsoft article within the link below which explains that if you install a third party antivirus, Windows Defender automatically gets disabled or goes in passive mode. -us/windows/security/threat-protection/windows-defender-antivirus/windows-defender-antivirus-compatibilityHowever, Malwarebytes Premium is a complete antivirus alternative. Malwarebytes guarantees the protection below:Removes malware and spywareDetects and removes malware and other advanced threats.Automatically finds malware 24/7Detects malware in real-time, before it can be a danger to your deviceStops exploit attacksShields vulnerable systems and softwares from exploit attacks.Blocks ransomware attacksStops ransomware attacks before your data is held hostage.Shields against malicious websitesPrevents access to and from known malicious websites.For additional information please visit the link below:
I couldn't agree more; I also have one lifetime license and I often kick myself for not buying two. Does Malwarebytes offer less protection (or functionality) when running as a "secondary" product alongside Defender as opposed to running it in place of Defender?
So I have the latest build do I untick the box to always register with windows security center? Also what do I do after that about Windows defender as of now where i have the latest build of it and win 10 OS up to date?
7fc3f7cf58