Epson Adjustment Wizard 2 Stylus Pro 7800 36
Rivka Licklider
How to Use Epson Adjustment Wizard 2 for Stylus Pro 7800 36
If you own an Epson Stylus Pro 7800 36 printer, you may need to use the Epson Adjustment Wizard 2 program to perform various maintenance tasks, such as resetting the waste ink pad counter, aligning the print head, or adjusting the paper feed. In this article, we will show you how to download, install, and use the Epson Adjustment Wizard 2 for Stylus Pro 7800 36.
What is Epson Adjustment Wizard 2?
Epson Adjustment Wizard 2 is a software tool that allows you to adjust various settings and parameters of your Epson Stylus Pro 7800 36 printer. It has two modes: sequence mode and individual mode. In sequence mode, you can select the replaced parts on the screen and follow the step-by-step instructions to perform the necessary adjustments. In individual mode, you can choose any adjustment item from the list and execute it manually.
Epson Adjustment Wizard 2 also includes a NVRAM backup tool that can read and write the variables in the printer's NVRAM (non-volatile random-access memory). This can be useful for restoring the printer's settings in case of a main board replacement or a firmware update.
Where to Download Epson Adjustment Wizard 2?
Epson Adjustment Wizard 2 is not available from the official Epson website or support. However, you can find it from some third-party sources online. One of them is www.2manuals.com, where you can purchase it for $29.99[^1^]. Another option is to use a torrent site like Demonoid, where you can download it for free[^2^]. However, be careful when downloading files from unknown sources, as they may contain viruses or malware.
How to Install Epson Adjustment Wizard 2?
After downloading the Epson Adjustment Wizard 2 file, you need to unzip it and run the adjwiz2.exe file in the Wizard folder. You also need to have the Epson Stylus Pro 7800 36 printer driver and Epson Status Monitor 3 installed on your computer and make sure that the communication between your PC and printer is correct.
The operating system requirements for Epson Adjustment Wizard 2 are Windows 98 / Me, Windows 2000 / XP. If you are using a newer version of Windows, you may need to run the program in compatibility mode. To do that, right-click on the adjwiz2.exe file, select Properties from the menu, go to the Compatibility tab, and choose Windows XP from the drop-down list.
How to Use Epson Adjustment Wizard 2?
To use Epson Adjustment Wizard 2, you need to power on your printer with Maintenance Mode 2. To enter Maintenance Mode 2, press and hold down the Paper Source button while turning on the power switch. The LCD screen will display "MAINTENANCE MODE".
Then, launch the adjwiz2.exe file on your computer and select your printer model from the list. You will see two options: Sequence Mode and Individual Mode. Choose the one that suits your needs and follow the instructions on the screen.
If you want to use the NVRAM backup tool, you can access it from either mode by clicking on the NVRAM button at the bottom of the screen. You can then choose to read or write the variables in the printer's NVRAM and save them to a binary file.
Caution:
- The default setting of a new main board is initial charge = ON. If you insert a new main board and power on without Maintenance Mode 2, the initial charge will start.
- When using the NVRAM backup tool, do