New error since 4.1.1?

[Andrew Voelkel]

Hi,

Since I updated to 4.1.1, I've noticed that every time my Macbook Pro goes into power save mode and comes back up, Spyder freezes for a bit and then I get this dialog box, :

Enable auto high DPI scaling is *already* enabled. Usually I can say "no" and everything is OK, but once the scaling of the help window was wrong afterwards (everything was too small). I run an external 5K2K monitor (https://www.lg.com/us/monitors/lg-34WK95U-W-ultrawide-monitor), and I usually leave the Macbook closed so its screen is always off. I don't recall this ever happening with 4.0.1.

Is there anything I can do to make this stop? It's quite annoying since it happens every time I walk away from my computer for a while.

- Andy Voelkel

[Kiko]

2020-03-25 1:56 GMT+01:00, Andrew Voelkel <jandyman...@gmail.com>:
> Hi,
>
> Since I updated to 4.1.1, I've noticed that every time my Macbook Pro goes
> into power save mode and comes back up, Spyder freezes for a bit and then I
>
> get this dialog box, :
>
>

> Enable auto high DPI scaling is *already* enabled. Usually I can say "no"
> and everything is OK, but once the scaling of the help window was wrong
> afterwards (everything was too small). I run an external 5K2K monitor
> (https://www.lg.com/us/monitors/lg-34WK95U-W-ultrawide-monitor), and I
> usually leave the Macbook closed so its screen is always off. I don't
> recall this ever happening with 4.0.1.

I confirm this is happening also on Windows 10, 64 bits.

I'm also getting a dialog box about the autocomplete not working
because I'm not connected to internet, that I should check the
firewall. This is strange as I'm not using kite and I don't know why I
need internet connection to autocomplete.

Thanks for the hard work!!!!

>
> Is there anything I can do to make this stop? It's quite annoying since it
> happens every time I walk away from my computer for a while.
>
> - Andy Voelkel
>

> --
> You received this message because you are subscribed to the Google Groups
> "spyder" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to spyderlib+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/spyderlib/2c05ea11-9704-4124-9d43-219be2bb5784%40googlegroups.com.
>

[Andrew Voelkel]

I noticed that the graphic didn't come through the first time, trying again. This problem is big enough that I think I'm going to have to downgrade to 4.0.1 until it is resolved.