Toolbox crash

[Elisangela Araujo]

Hi, has anyone faced problems with SWAT+ Toolbox crashing? I'm trying to run the sensitivity analysis, but it closes when I try to load it.

[Celray James]

Which method are you using?

Please send me your project (go to Export --> Project, and send me the sptp file and I will check what is going wrong.

Kind Regards,

Celray James CHAWANDA

[Elisangela Araujo]

Hi, Celray, I was using Sobol method, I just added the parameters that I wanted to use in the sensitivity analysis, but it closes everytime I try to run it even if I choose less samples.

I put the data on this link to share with you: share

Let me know if you have any problems trying to acess it.

[SWAT+ Toolbox]

I do not have access to your OneDrive, please use wetransfer or https://swatplus.link/share

[Elisangela Araujo]

I also put the data here: https://swatplus.link/ZZD19QU7XZPU

[SWAT+ Toolbox]

Looking into it

[SWAT+ Toolbox]

Seems to be running on mine, 11% so far.

However, your issues are more likely because of parameter range and change type mismatch.

cn2 should be percent -20 to 20 or even over 20, if relative -10 to 10 makes sense. For esco and epco: use replace since this parameter default is 0.95 in all hrus and you used the entire range. if you are ever unsure, i recommend percent.

you can also add predefined parameters using the add by sets option and remove what you do not need

[Elisangela Araujo]

Hi, thank you! I'll try to change the parameter range. 

Could tell if there is any documentation about the parameters change type? I didn't know that some of them should be in percent, it'd help me not have troubles in the future. Thank you a lot.