SWAT+ Toolbox

My SWAT+ Toolbox was showing an error on the sensitivity analysis, so I decided to reinstall it. Now

Dear all, I am reaching out to request your assistance with a specific decision table that I am

Dear users, I'm currently working with the SWAT+GWflow model and facing serious difficulties with

I had forgotten to link the project I changed: https://swatplus.link/OJX3AEZKYEFC On Tuesday, 8 April

There is probably an issue with one of the input files but I do not know which, please send your

Your intuition is correct, you can change the pcp, tmp, hmd, wnd, and slr CLI files to specify which

If you were on 3.0.5 and were editing plant communities, please replace the plant.ini file from your

Hi everyone, I would like to calibrate my model using my observed flow data at Sub Daily timestep,

m3/s. See the documentation or the gitbook, there is all. El lun., 31 de marzo de 2025 8:12 p. m.,

What could go wrong with my output?

Hi all, Thanks again for the quick replies. I have checked that the codes are the same between SPE

Okay thank you! Is there anything you recommend me to do? Should I calibrate the manning values

Yes, it works fine. Thank You. On Tuesday, March 25, 2025 at 9:33:48 PM UTC-4 SWAT+ Toolbox wrote:

I already see something fishy with the canmx line. Here is how to find what is going wrong. At the

Hello Celray, I was trying to apply changes in aquifer parameters but only in specific objects, so I

Seems like you are using a very small sample size, you need more than 1000 for robust ranking On

Greeting colleagues, I am calibrating my model in SWAT+ Toolbox, well my model seems a bit off with

Hi James, I started from scratch. It worked out. On Monday, March 17, 2025 at 5:10:42 PM UTC+1 Celray

For the harvesting, I need to see what is happening with your model (could you export project and

https://celray.github.io/SWATPlusToolbox/3.0.3/downloads/ On Tuesday, 18 March 2025 at 10:09:47 UTC-5

I've got the same problem...! El sáb, 15 mar 2025 a la(s) 1:25 pm, mohamed yacoubi (yacoubim4@

Check your cropping patterns -------- Original message -------- From: Rodrigo Sariago <

units are Kg every output file has units in the header On Monday, 10 March 2025 at 01:00:05 UTC-5

Did you finally figure this out? If not, it would be a good idea to post the nitrogen issue here:

Did you figure this out? Did you check this: https://celray.github.io/SWATPlusToolbox/3.0.3/ ? James

Do you have this project still? Can I take a look at it, I need to issue a patch for this as soon as

Thank you for your answer. Can you recommend any mechanism to evaluate the water temperature ?? On

Hello Arantxa, I also encountered a similar problem some few moments ago. Kindly check, the change

Hi Berhanu, I believe Celray and other model developers are working hard on a new version of Toolbox,

try switching to Hargreaves PET method and calibrate PETCO, be careful though - PETCO is a powerful