Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

1-wire usb - seriel pl2303 an 3.10.10

8 views
Skip to first unread message

Frank Stroeter

unread,
Oct 29, 2017, 2:51:21 PM10/29/17
to
Hallo Mitlesende,

ich kämpfe gerade mit einem Profilic usb - seriel Adapter pl2303
und dem 1-wire Bus.

Fli 3.10.10
OPT_USB='yes'
USB_EXTRA_DRIVER_N='1'
USB_EXTRA_DRIVER_1='pl2303'

OW_OWSHELL_DEV='ttyUSB0'
OW_OWSHELL_PORT='127.0.0.1:4304'

Mit einem seriellen und einem USB Adapter klappt alles.
Mit dem pl2303 sehe ich im hhtpd keine Bauteile
(Es wurde kein Bauteil erkannt).
Beim Einstecken wird er als pl2303 ttyUSB0 auf der Konsole erkannt.

Zum Adapter:
Based on PL-2303TA USB/Serial adapter chip
Emulate DS9097 adapter

Weiß jemand Rat?

Vielen Dank schon mal
Frank

Roland Franke

unread,
Oct 29, 2017, 4:35:06 PM10/29/17
to
Hallo,

> ich kämpfe gerade mit einem Profilic usb - seriel Adapter pl2303
> und dem 1-wire Bus.
> ...
> USB_EXTRA_DRIVER_1='pl2303'
>
> OW_OWSHELL_DEV='ttyUSB0'
> OW_OWSHELL_PORT='127.0.0.1:4304'

leider muss ich dir mitteilen, dass dieser Adapter von OWFS selbst
(www.owfs.org) nicht unterstützt wird. Thema wie ich gelesen habe
ist, dass die zugehörigen Treiber nicht richtig arbeiten.
Von https://sourceforge.net/p/owfs/mailman/message/30135230/
>>> The FTDI Chip ones work much better then those. The PL2303 one
>>> suffers from not being properly introduced to Linux. Whereas the FTDI
>>> one has been. Sadly they do not have an open source directly driver,
>>> but the one that's in the kernel works.

Da können wir dir dann auch nicht helfen, da beim Router-Projekt
das Paket OW direkt auf der Basis von www.owfs.org arbeitet.

Gruß Roland

Frank Stroeter

unread,
Oct 30, 2017, 2:52:57 AM10/30/17
to
Hallo Roland,

vielen Dank für die Info. Dann kann ich ja aufhören :-((

Gruß Frank
0 new messages