Easeus Todo Backup 12.0 Download
Channing Chambers
We found the five products/applications the best free backup software for both personal and home users, without too much learning they can easily operate the software and make a dependable backup of files, folders, OS, or even hard drives to any desired location. In case of any unexpected data loss or system corruption issue happens, an existing backup image can save the day!
In fact, Microsoft Windows 10 has File History to backup your device and files for free. But Is Windows 10 backup any good? As is known, File History is an automated file backup system on Windows 8/8.1 and Windows 10. With this built-in tool, you can do more than just restore previous versions of files; It's a competent backup tool for your needs.
However, now after a fresh reinstall I'm pulling one folder from the backup that I made, just one folder, and I've been staring at a progress bar that didn't even get to 1% in 25 minutes. I'm afraid Easeus Todo Backup is a terrible solution as the restore function is extremely slow. I have disabled Windows Defender to speed it up a but, but it seems like it's even taking around 1 to 5 seconds for files that aren't even 1Kb.
I'm so bummed out because this is my work computer and I trust companies to put out good software, I mean, they are advertising that their software is good, so that claim is obviously ridiculous. At first it displayed it would take approx. 55 minutes to restore just one folder from the backup, but now after half an hour the time estimate has disappeared and the progress bar is still under 1%.
Take this warning, and go for another backup program. Now I have to let this run probably till well into tomorrow before I can even use this one folder, not to mention all the other data I still have to retrieve.... I hope the Easeus Todo Backup staff steps onto a lego with their bare feet!
I have bee n using EaseUS ToDo backup trial version for backing up my system for about more than 3 years. So far it has worked well. But recently i downloaded their version 8.3 that is latest version of this time. But when i launch the software, it is completely frozen. Not moving forward. Only splash screen is there and a spinning slide that is showing that program is loading. But when i see task manager or disk indicator for activity, there is no activity.
Before using system transfer, it is essential to have the following prepared:
1. A valid system image file created with System backup or Disk/partition backup option.
If you have not yet made your system backup, please refer to the screen shot below to create a system backup on your source computer. You can click HERE to get a more detailed instruction.
Note:
System backup needs to be stored on an external hard drive, so that it can be easily transferred to your target computer. It can be on the same drive with your WinPE bootable disk. If you want to transfer the entire hard drive including the other partitions such as recovery partitions, please navigate to Disk/Partition backup, and select the entire disk.
2. A proper WinPE bootable disk/USB which can be loaded on target machine.
If you have not yet created the bootable media, the screen shot below shows you where to find this option in the product. You can click HERE to get a more detailed instruction.
Steps for System Transfer
1. Connect both the WinPE bootable media and the external drive that contains your system backup image file to the computer you want to transfer to, and set to boot from the WinPE bootable media.
2. After the bootable media is properly loaded, please select System Transfer option in Tools.
3. Choose the system backup file from the backup source folder. Cloud is not supported in WinPE environment.
4. Locate the system backup image file in the prompted window, then click OK.
5. Select the target drive that you want to recover the system backup to, and click Next to initiate the process.
6. After the restoration is properly completed, you can reboot your computer, disconnect the WinPE bootable media, and boot from the target drive.
Create System Backup
Create Bootable Media
Steps for System Transfer
1. Connect both the WinPE bootable media and the external drive that contains your system backup image file to the computer you want to transfer to, and set to boot from the WinPE bootable media.
2. After the bootable media is properly loaded, please select System Transfer option.
3. Locate the system backup image file in the prompted window.
4. Select the target drive that you want to recover the system backup to, and click Next to initiate the process.
5. After the restoration is properly completed, you can reboot your computer, disconnect the WinPE bootable media, and set to boot from the target drive.
This morning I deleted backup plan, then I created a new plan and backed up to the USB HDD. It took about 30 minutes and the computer/Windows are working as they should. Over the network with ethernet backup took about 3 hours and Windows was down hard.
Two questions:
Were you running the image backup from a live computer? I have always found it better to boot from the backup software Rescue Media and run the backup from there without the computer online.
Were you running the backup of both computers at the same time, both using the NAS drive as target simultaneously?
Windows has a mechanism to allow you to take a snapshot of the files and then copy that snapshot to the backup device. It could be a timing issue where the snapshot fails because the network copy is slow.
I always create a Restore Point just before launching my backup program on any given Friday. ETBH had not been used since 2023-02-03, so there should have been no updates or other modifications to its files.
Might want to look at say restore points from say last week or last time you did a backup to see if that one is normal.
Then check your system event logs, application event logs and see of there is something listed there that crashed. (just trying to narrow the timeline a bit)
I'm hoping someone can offer some assistance - I'm trying to restore a PBD backup file (containing a full OS and system backup - made using EaseUS Todo Backup) to a blank/new VirtualBox VM, and can't seem to get anywhere. The PBD file was originally on an external USB drive, and while I could get the blank/new VM to see the external USB drive via enabling USB in the VM settings, it then wouldn't see the WinPE ISO file I'd attached to the VM in order to be able to do something with the PBD file.
I then tried to move the PBD file to a new hard drive VDI file I'd created, figuring I could attach this VDI, another VDI that would ultimately be where the PBD file contents were restored to (and be the primary hard drive of the VM), and the EaseUS WinPE ISO (in order to facilitate the restore), but this didn't work either (I can't quite remember what didn't work when trying this, as by this point it was getting late and I was getting tired and running out of steam).
Any thoughts or suggestions on how to accomplish this? I had thought this would be relatively easy, but it seems like it isn't unless I'm just overlook something simple (which is likely). Any help is greatly appreciated. Thanks!
Although next time if I don't grab the entire disk to backup but just partitions, I might be able to use a non-free version of EaseUS Todo Backup to convert the PBD partition backup to a VMDK or VHD file (see here: -easeus-todo-backup-pbd-to-virtualbox Opens a new window)
EaseUS Todo to automatically backup some files stored on the public side of my MyCloud NAS, specifically the iPhone photo backup folder which is created on the public side by the MyCloud app. I can access/backup files from the private side with the same software no problems but when I try to access the public folder (Z) I get the following dialogue box pop up asking for credentials
Both True Image and ToDo Backup feature file-level and image-level backups as a core function of how they protect data, they also both allow for potentially unlimited file version retention and this is available across both Windows and MacOS operating systems for both applications. Both applications are also available on either a subscription basis or via the purchase of a perpetual licence (meaning a single one-off purchase, although not eligible for upgrades to the latest version as are the subscriptions).
Good security is obviously an important consideration whenever files are being backed up, especially when stored on portable media such as external hard drives or on third party cloud storage. As such it is good to see both services taking data security seriously and both offering customers to ability to apply zero knowledge 256bit AES encryption to their backup sets locally.
These include compressing your backup to save space, encrypting it for security purposes, and setting up a backup schedule that supports full, differential and incremental backups to minimise the space taken up as your backups grow in number.
EaseUS Todo Backup Free is a hard disk image, file backup, disaster recovery and disk clone freeware for home. EaseUS Todo Backup efficient and stable features ensure the security of all the information on your computer. It can back up the operating system and all of your important data including documents, photos, music, applications, and financial data.
df19127ead