Re: [sparksdr] Save settings when exiting

[Josh Logan]

Setup the multiple receivers and decoders you want then click on the star button.

Save a profile three boxes not the single star.  

Then when you start you can load that profile. 

If nothing is being saved, callsign, grid, etc then I think you're permissions are wrong.  Look in %appdata% under all three directories for the application directory and delete it. 

https://www.sparksdr.com/manual

Has the full paths. 

73, KD7HGL 

Josh

On Sun, Mar 22, 2026, 6:23 AM Jean-Baptiste GALLAUZIAUX <jb.gall...@gmail.com> wrote:

I'm running SparkSDR v.2.0.995.0 with a Hermes Lite 2 XCVR and a Windows 11 computer.

Is there a way to save the settings when exiting. I would like particularly to restart with the last used frequency and mode, the filter setting and the PA enabled.

when I restart SparkSDR I always find an odd frequency (14,095,600), J16 for filters instead of n2adr-hpf-lpf and the PA disabled.

Another question: in the CW and PSK templates I can read <NAME> Where can I register this NAME?

73 - Pierre - HS0ZRT (formerly FK8IH)

--
You received this message because you are subscribed to the Google Groups "SparkSDR" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sparksdr+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/sparksdr/b5aa7d95-e291-40c0-84ba-b0c30f239313n%40googlegroups.com.