DIGI-U filter settings 2.0.955

[Trevor Smithers]

Alan

RSP duo running numerous receivers on 6m (ADC1) and 4m (ADC2). One receiver is set up on ADC2 with mode set to digi-u with VAC output to MSHV to monitor MSK144 on 70.174.

Everything works as expected.

If I now switch to another receiver the filter settings on the digi-u receiver revert to minimal (default) settings of 100Hz and effectively cut off the connection to MSHV

Restarting Spark from saved profile resets everything.

Bottom line - digi-u filter settings not being retained. 

73 Trevor  G0KTN

[Josh Logan]

I saw this with ssb filter settings as well.

I updated to the latest beta, but have not tested it yet.

73, KD7HGL

Josh

--
You received this message because you are subscribed to the Google Groups "SparkSDR" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sparksdr+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sparksdr/4a7f2269-d938-4db7-b145-175a09eb68b7n%40googlegroups.com.

[ahop...@googlemail.com]

Hi Trevor and Josh,

I think this is caused by an avalonia bug that affects all the thumbwheel controls, the latest release should not have the setting to 100 bug but has another bug that means the range is not limited on these controls. I have a fix but was hoping to add a couple of extra features that have taken longer than expected.

73 Alan M0NNB

[Trevor Smithers]

Alan

Have been running 2.0.966 and the filter problem has been fixed.

Nothing else seems to have been affected so all good.

73

Trevor  G0KTN

[Brian VK4BAP]

Hi Alan,

I've moved from 2.0.28 to 2.0.966 using DigiU and WSJT-X. Looks OK on receive but when I go to transmit on WSJT it now changes SparkSDR to USB.

Reverted back to 2.0.28 and it stays on DigiU but I can't transmit above 2.7KHz ... 

Windows 10, 64 bit version.

73 Brian VK4BAP

[ahop...@googlemail.com]

Hi Brian,

I did change the mode names used over the rigctrl cat link a while ago but no one else has reported this problem, I wonder if there is a WSJT-X setting that is causing this, I use the default settings other than setting the port number and ptt over cat.  I'm away from radios at the moment but will test on an emulator over the weekend.

73 Alan M0NNB