Filter own TX

Ronald Spiering

unread,

Jul 29, 2022, 3:45:58 AM7/29/22

to SparkSDR

Dear Alan,

Is it possible to filter on own transmits from reporting text?

The call is in the general settings.

Just a check box if you want or not.

I have quite a lot of power and get decodes on 50.323 and 50.333 while transmitting at 50.313MHz even with no antenna connected.

The Red Pitaya is a Hamlab with a grounded metal case and all cables have #43 clamp ferrites.

I get +37 snr on 313 which seems to be the protection diodes limits and about -15 on 323 and -17 on 333.

A friend of my gets with 5 Watts also +37 but no decodes on 323 and 333.

Regards,

Ron

ahop...@googlemail.com

unread,

Jul 29, 2022, 4:23:16 AM7/29/22

to SparkSDR

Hi Ron,

firstly rest assured that spots of you own callsign are not reported to pskreporter or wsprnet. This has been asked for before and is on my list but quite far down. I actually like seeing my own spots and actually use it as a way to test the whole system by TXing into a dummy load. I shall move it up the list a notch or two :)

73 Alan M0NNB

Ronald Spiering

unread,

Mar 19, 2023, 4:24:45 AM3/19/23

to SparkSDR

Hi Alan,

Where is this point now on the list?

Regards, Ron

Op vrijdag 29 juli 2022 om 11:23:16 UTC+3 schreef ahop...@googlemail.com:

Reply all

Reply to author

Forward