SparkSDR

Alan, Checked network cable but no difference. Not sure what helped to solve the network conenction.

On 19/03/2023 09:07, 'ahop...@googlemail.com' via SparkSDR wrote: > Hi David, > this is

Hi Alan, that's great! I will test it as soon as the Es season at 6m starts. At the moment only

Hi Alan, Where is this point now on the list? Regards, Ron Op vrijdag 29 juli 2022 om 11:23:16 UTC+3

Dear Alan, I have project with 16 bit Red Pitaya needs two inputs one with 144MHz and the other woth

hello Alan.....is this near the top of your list plus,..... like to ask if its possible to have a the

There must exist a way to bypass the alert and download SparkSDR. I use Edge under Windows 11 with

HL2 with SparkSDR Am I right in thinking that when the SparkSDR PA is disabled, low power RF output

Hi, thanks for spotting that, I think it should be ok in the stable release, I swapped to using

Hi Alan, I have made some test lately, which have shown a nice result. On an Raspberry FLDigi and

I just did a sanity check and sdrplays still work for me on my ancient intel mac, I have found

Hi David, sorry there is no RTTY decoder built in at the moment so you have to use your pick of

Hi Ludger, there is the websocket interface to spark that streams iq, this https://www.sparksdr.com/

Hi Thomas, can you point me to your script that causes the problem so I can test, I wonder if it is a

Yesterday afternoon I used another setup to do the same test: Yaesu FT817nd - WSJTx 2.6.1 After a few

Hi Erwin, setting to 100% should work, there will still be a random effect if the the tx periods are

I should have known that location by now ;-) The process cannot access the file 'C:\Users\Erwin\

Hi Erwin, good spot, it appears powers with a 3 at the end in the db figure are rounded down to the

Hi, the situation is a little more complex than that, this is my understanding:- It is generally

With regard to running all these decoders in parallel, my Raspberry Pi 4B could not keep up. So I

Hi Pierre, The dot means it is on, it is a slow process so don't expect to see an instant result.

Run it now with 2 radios from 1 SparkSDR and that is marvelous. Thanks Andy. Op zaterdag 25 februari

Hi, as you are using level 3 it is the wspd decoder detecting false spots (same true for 1&2), so

RDP Thanks for the feedback and I'll try to add the extra package installation advice to a Linux

Hi Trevor, the clear spots should be simple. I've been asked about the colours before and keep

Hi Alan, confirmed. Thanks for your help. vy 73 de Thomas, DL3EL ahop...@googlemail.com schrieb am

Hi All, I've just discovered that AM transmission has been broken in the 2.0.9xx releases (so I

well, the radio itself is still able to transmit outside of Ham Bands. It just that the software may

Hi Alan, thanks. I just did a brief test (update, one FT8 qso and check CW). Everything works fine.

Hi All, I don't recommend trying these releases, my automated tests did not detect a mouse issue