Fwd: Concepts NREC's SpinOffs Blog: The Best CFD Averaging Methods for Distortion

[Mr.Gopalsamy Murugesan]

---------- Forwarded message ----------
From: Ram Pranav <RPr...@conceptsnrec.com>
Date: 16 August 2017 at 11:14
Subject: Concepts NREC's SpinOffs Blog: The Best CFD Averaging Methods for Distortion
To: Nitin Jain <nj...@conceptsnrec.com>
Cc: Bharath DV <d...@conceptsnrec.com>

Dear Turbomachinery Professional,

We would like to share our new blog topic on The Best CFD Averaging Methods for Distortion discussing on –

 

·         Three most common averaging methods are:  area, mass, and mixed out states

·         The “correct” averaging  method to use while comparing CFD to test results

 

CLICK HERE to know more…

 

Here is your weekly roundup of blog posts from Concepts NREC.

The Best CFD Averaging Methods for Distortion By Mark R. Anderson Three-dimensional flow fields typically have some degree of distortion in the flow properties and flow profiles across a given cross section. These distortions can be quite significant in regions that include the exit plane of the impeller. Because most designers are interested in averaged values of performance, the question often arises as to what averaging technique is the best to use. Read more »

Regards,

Ram pranav

Senior Sales Engineer

45, CA Site No. 1, HAL 3rd Stage,

Behind Leela Palace, Kodihalli,

Bangalore – 560008- INDIA

Mob: +91-9739994051

Phone +91-80-40926698; Fax +91-80-40926698

Email: rpr...@conceptsnrec.com

Website: www.conceptsnrec.com

ISO 9001:2008 and AS9100c Certified

 

 

 

 

---

Please consider the environment before printing this email.

---

The information contained in this communication and any attachment(s) and/or link(s) hereto may contain proprietary and/or confidential information, which may be privileged or otherwise protected from disclosure, and is intended only for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure, or distribution is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message from your computer system. If you have any questions concerning this message, please contact the sender.
This email may contain technical data which is controlled under the International Traffic in Arms Regulations (ITAR Title 22 U.S.C. Sec 2751 et seq.). Any such data may not be exported to a Foreign National or Foreign Company (any non-US person or organization as defined by 8 U. S. C. 1101(a)(20)). The transfer or disclosure of ITAR governed information without a required export license approved by the United States Department of State, Directorate of Defense Trade Controls is prohibited under US Federal law.

--

With Thanks and Regards

M.Gopalsamy,

Assistant Professor,

Department of Aerospace Engineering,

School of Mechanical Sciences,

Karunya University,

Coimbatore-641114.

Mobile No:+91 8754295499, 8220166177

Office No : 0422-2614426

Email Id: gopal....@gmail.com

               gopa...@karunya.edu