[Help!] SMT Test model compatibility error..

[Jisu Yoo]

Hi, everyone. I noticed the following error while doing Test model compatibility.

The error seems to be Windows-related, but does anyone know how to fix it?

-----------------

Executing: validation2 C:\smt\testing C:\smt\toolbox
Start Time: Thu Apr 11 22:36:24 2024
Running script validation2...
SPREADTYPE field already exists, and the existing field will be used.
Running model for point 1... model to run is: spreadgis
Use of the old barrier approach for SPreAD-GIS has been deprecated. It has been kept as the default to maintain backwards compatiblity with earlier code. However, use of the new barrier calculations is recommended.
Warning: Intermediate data from prior runs of SPreAD-GIS were deleted and results for the 400 Hz frequency band will be overwritten ...
Calculating spherical spreading loss ...
Calculating atmospheric absorption loss for an elevation of 1782.74 m, air temperature of 28.3 C degrees , and 26.0% humidity ...
Calculating foliage and ground cover loss ...
Calculating upwind and downwind loss for wind blowing from 105 degrees and wind speed of 12.9 k/hr on a clear, windy summer day ...
Calculating decline in sound levels due to barrier loss ...
Identifying areas where ground, barrier, and atmospheric effects dominate ...
Calculating final noise propagation patterns ...
1
Weighting frequencies to perform A-weighting
Summing A-weighted sound levels over all frequencies
Weighting frequencies to perform A-weighting
Summing A-weighted sound levels over all frequencies
SPREADTYPE field already exists, and the existing field will be used.
Running model for point 1... model to run is: spreadgis
A source offset of 0.34 was applied to the data to minimize compuational errors
Unfortunately, the SPreAD-GIS code does not support any source offsets specified in the points shapefile
Unless an NMSim .src file is used as the input
Warning: Intermediate data from prior runs of SPreAD-GIS were deleted and results for the 400 Hz frequency band will be overwritten ...
Calculating spherical spreading loss ...
Calculating atmospheric absorption loss for an elevation of 1782.74 m, air temperature of 28.3 C degrees , and 26.0% humidity ...
Calculating upwind and downwind loss for wind blowing from 105 degrees and wind speed of 12.9 k/hr on a clear, windy summer day ...
Calculating final noise propagation patterns ...
1
Weighting frequencies to perform A-weighting
Summing A-weighted sound levels over all frequencies
Weighting frequencies to perform A-weighting
Summing A-weighted sound levels over all frequencies
NMSIMTYPE FIELD ALREADY EXISTS, THE EXISTING FIELD WILL BE USED
Running model for point 1... model to run is: nmsimgis
processing output array in 2 pieces
Failed script validation2...

Traceback (most recent call last):
  File "C:\smt\toolbox\scripts\B_Validation.py", line 107, in <module>
    vh.validate_arcgis_version(testing_dir, tbx_root, skip_test_run, test_spread, test_nmsim, test_iso, is_GUI)
  File "C:\smt\toolbox\scripts\validationhlpr.py", line 109, in validate_arcgis_version
    summarize = 1, keep_intermediates = 1, is_GUI = is_GUI)
  File "C:\smt\toolbox\scripts\soundprophlpr.py", line 271, in SoundPropagation
    temp, rh, freq_lst, point_id, point_fill, freq_fill, tbx_root, my_times, my_time_labels, keep_intermediates, n_processes, is_GUI, model)
  File "C:\smt\toolbox\scripts\nmsimhlpr.py", line 188, in nmsimgis_setup
    raise ValueError(error_output)
ValueError: Traceback (most recent call last):
  File "C:\smt\toolbox//scripts/nmsimgis_analysis.py", line 93, in <module>
    my_times, my_time_labels, model)
  File "C:\smt\toolbox\scripts\nmsimhlpr.py", line 317, in nmsimgis_analysis
    dist_vec, hgt_vec, imp_vec, freq, nfreq, nmsim_dll, point_dir)
  File "C:\smt\toolbox\scripts\nmsimhlpr.py", line 604, in nmsimgis_core
    srcfile, nfreq)
  File "C:\smt\toolbox\scripts\nmsimhlpr.py", line 1424, in NMSim_Source
    nmsim = cdll.LoadLibrary(nmsim_dll)
  File "C:\Python27\ArcGIS10.3\lib\ctypes\__init__.py", line 443, in LoadLibrary
    return self._dlltype(name)
  File "C:\Python27\ArcGIS10.3\lib\ctypes\__init__.py", line 365, in __init__
    self._handle = _dlopen(self._name, mode)
WindowsError: [Error 193] %1            Win32


Failed to execute (validation2).
Failed at Thu Apr 11 22:38:52 2024 (Elapsed Time: 2 minutes 27 seconds)