RE: Re: Re: Re: [souliss] Re: [SST] - Souliss Smart Thermostat WiFi - First Release

34 views
Skip to first unread message

Keith Davies

unread,
Dec 4, 2019, 11:26:16 AM12/4/19
to sou...@googlegroups.com

Hi Dario,

Been a while since last email.

I have tried to make progress by downgrading to esp core to 2.3, as I am guessing around that version when you put the project together, and done a fresh install of Arduino IDE using libraries from the folder you pointed me to but still will not compile, do you have any time to fix problems?

Best wishes,

Keith

 

From: Dario Cdj
Sent: 16 November 2019 21:11
To: souliss
Subject: Re: Re: Re: [souliss] Re: [SST] - Souliss Smart Thermostat WiFi - First Release

 

Last time I've compiled with ide 1.6... Next week I try to make some update to repository

 

--

You received this message because you are subscribed to the Google Groups "souliss" group.

To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/396be074-ca80-48b9-853d-64b6606110cf%40googlegroups.com.

 

Dario Cdj

unread,
Dec 4, 2019, 1:00:06 PM12/4/19
to souliss
Yes it is... i've tried to compile but fail also with my 1.6 ide. 
Sincerly in this moment when i've time i want to play with SST2 that is in my lab desk... (same function plus touchscreen with nextion and new layout)....
If you want to help or develop feel free to fork my repository, now i update it, in this moment there's only temp and hum shown on screen with graphic layout and i'm working on setpoint and crono function

Dario2


Il giorno mercoledì 4 dicembre 2019 17:26:16 UTC+1, Keith Davies ha scritto:

Hi Dario,

Been a while since last email.

I have tried to make progress by downgrading to esp core to 2.3, as I am guessing around that version when you put the project together, and done a fresh install of Arduino IDE using libraries from the folder you pointed me to but still will not compile, do you have any time to fix problems?

Best wishes,

Keith

 

From: Dario Cdj
Sent: 16 November 2019 21:11
To: souliss
Subject: Re: Re: Re: [souliss] Re: [SST] - Souliss Smart Thermostat WiFi - First Release

 

Last time I've compiled with ide 1.6... Next week I try to make some update to repository

 

--

You received this message because you are subscribed to the Google Groups "souliss" group.

To unsubscribe from this group and stop receiving emails from it, send an email to sou...@googlegroups.com.

Keith Davies

unread,
Dec 5, 2019, 2:28:27 PM12/5/19
to sou...@googlegroups.com

What will the advantages be compared to the first SST.

To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/7923e597-75df-40e0-9ada-309ee2fcdb5d%40googlegroups.com.

 

Dario Cdj

unread,
Dec 5, 2019, 2:30:46 PM12/5/19
to sou...@googlegroups.com
Nextion, touch screen, graphics, autolearn... 

You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/eQFgSYxogOU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de95a59.1c69fb81.51841.58d1%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 2:35:36 PM12/5/19
to sou...@googlegroups.com

What is your understanding of the term autolearn, is it the same as what I would call optimum start where an algorithm self learns from heating losses/gains/outside/inside temperatures to achieve the economic start for building occupancy?

Dario Cdj

unread,
Dec 5, 2019, 2:36:51 PM12/5/19
to sou...@googlegroups.com
Yes this will be the optimum result..... 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de95c06.1c69fb81.c898c.6491%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 2:50:39 PM12/5/19
to sou...@googlegroups.com

I do not see any benefit of a separate display, that era is gone now, everyone walks around with a smartphone display that seems to me is the way to go.

Dario Cdj

unread,
Dec 5, 2019, 2:54:43 PM12/5/19
to sou...@googlegroups.com
Yes but you can look a moment your display and always your sons can take a look of temperature, topics coming from others node, etc... It's cool and useful... Well I program my sst from Web and not with encoder etc......
I agree with your thought about smartphone, but a node with a display is simply cool :)

Dario2

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de95f8d.1c69fb81.771b5.56e1%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:00:02 PM12/5/19
to sou...@googlegroups.com

So if I am correct your new SST2 will be a node which can be in a network of nodes in your home automation with the nextion display at the centre for GUI?

 

Sent from Mail for Windows 10

Dario Cdj

unread,
Dec 5, 2019, 3:01:34 PM12/5/19
to sou...@googlegroups.com
That's also sst1, there are topics in display... 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de961bf.1c69fb81.2532f.ec80%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:06:43 PM12/5/19
to sou...@googlegroups.com

At this point in time your SST1 is ideal for me, as I understand it can be used with just a smartphone web browser to change time schedules and heating thermostat setpoint when the issues are fixed?

Dario Cdj

unread,
Dec 5, 2019, 3:08:47 PM12/5/19
to sou...@googlegroups.com
Sincerely in this moment no idea, hope to find time to fix it

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de96351.1c69fb81.62396.6046%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:11:58 PM12/5/19
to sou...@googlegroups.com

I only have minimal experience of Arduino, but with your guidance, if you could suggest where the problems may be I could try to fix them?

Dario Cdj

unread,
Dec 5, 2019, 3:14:35 PM12/5/19
to sou...@googlegroups.com
Yes, if I can spend some time on it I do'it but don't really know if my know how is sufficient 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de9648c.1c69fb81.7c485.708a%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:17:36 PM12/5/19
to sou...@googlegroups.com

I assumed it was your code, am I mistaken?

Dario Cdj

unread,
Dec 5, 2019, 3:19:47 PM12/5/19
to sou...@googlegroups.com
Yes I'm a little programmer and original code is coming from Mr. Flavio....

D. 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de965de.1c69fb81.d6137.6574%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:22:00 PM12/5/19
to sou...@googlegroups.com

So you adapted the code for the webserver display for GUI?

Dario Cdj

unread,
Dec 5, 2019, 3:24:03 PM12/5/19
to sou...@googlegroups.com
At this moment my working sst has a Web interface that control everything.... 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de966e5.1c69fb81.97d51.4a65%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:26:11 PM12/5/19
to sou...@googlegroups.com

Is it possible that I could download the working code?

Dario Cdj

unread,
Dec 5, 2019, 3:47:49 PM12/5/19
to sou...@googlegroups.com
Well the problem is not the code, it's the compatibility with libraries. I've a million versions of code, but require lots of time to make it compile.... 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de967e0.1c69fb81.6edb3.5bc2%40mx.google.com.

Keith Davies

unread,
Dec 5, 2019, 3:55:23 PM12/5/19
to sou...@googlegroups.com

I have the time, just let me know what is needed and I will try to find the problems.

The first error on compiling is connection_dynamic.h  line 25 startwebserver was not declared in this scope

Dario Cdj

unread,
Dec 5, 2019, 3:59:37 PM12/5/19
to sou...@googlegroups.com
Yes something concerning asyncwebserver.... That's the problem

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5de96eb8.1c69fb81.ddd0e.6eb7%40mx.google.com.

Flavio P.

unread,
Dec 5, 2019, 4:27:38 PM12/5/19
to sou...@googlegroups.com
Hello,
I’ve read only last question about your topic.
In the moment that I’ve left SST development, it compile and work properly.
I can suggest you to start with right library version, you can found all in my repo the right docs, and a lot of the required library.

Flavio



--
P ********* Consideriamo l'ambiente prima di stampare questa e-mail *** Think about environment before printing *********
Il contenuto di questo messaggio e-mail è privato e riservato al solo destinatario. L'utilizzo non autorizzato può costituire reato. Se ricevuto erroneamente siete pregati di cancellarlo e comunicarci via e-mail l'errata ricezione.

Dario Cdj

unread,
Dec 5, 2019, 4:34:09 PM12/5/19
to sou...@googlegroups.com
Hi baby it is a great pleasure to see you here :) 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAMLDvsdHf74JdAJu8bmDrMWdH0AP3Oko6YARjc5kEDB4U-0KJg%40mail.gmail.com.

Keith Davies

unread,
Dec 6, 2019, 11:55:55 AM12/6/19
to sou...@googlegroups.com

Hi Flavio,

Thanks for your input.

How do I know which is the right  library version that will compile with the code, is there a way?

Keith

 

From: Dario Cdj
Sent: 05 December 2019 21:34
To: sou...@googlegroups.com
Subject: Re: Re: Re: Re: Re: Re: Re: Re: [souliss] Re:[SST]-SoulissSmartThermostatWiFi - First Release

 

Hi baby it is a great pleasure to see you here :) 

 

Il Gio 5 Dic 2019, 22:27 Flavio P. <master.fla...@gmail.com> ha scritto:

Hello,

I’ve read only last question about your topic.

In the moment that I’ve left SST development, it compile and work properly.

I can suggest you to start with right library version, you can found all in my repo the right docs, and a lot of the required library.

 

Flavio

 

 

Il giorno gio 5 dic 2019 alle 21:55 Keith Davies <kaye...@gmail.com> ha scritto:

I have the time, just let me know what is needed and I will try to find the problems.

The first error on compiling is connection_dynamic.h  line 25 startwebserver was not declared in this scope

 

From: Dario Cdj
Sent: 05 December 2019 20:47
To: sou...@googlegroups.com
Subject: Re: Re: Re: Re: Re: Re: Re: [souliss] Re:[SST]-SoulissSmartThermostatWiFi - First Release

 

Well the problem is not the code, it's the compatibility with libraries. I've a million versions of code, but require lots of time to make it compile... 

 

Il Gio 5 Dic 2019, 21:26 Keith Davies <kaye...@gmail.com> ha scritto:

Dario Cdj

unread,
Dec 6, 2019, 12:02:54 PM12/6/19
to sou...@googlegroups.com
It is included in repository 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5dea8818.1c69fb81.71fc2.707f%40mx.google.com.

Keith Davies

unread,
Dec 6, 2019, 12:07:51 PM12/6/19
to sou...@googlegroups.com

Hi Dario, but you stated yesterday that like me you also could not get the code to compile with those libraries, so you are confusing me now.

Dario Cdj

unread,
Dec 6, 2019, 12:13:03 PM12/6/19
to sou...@googlegroups.com
No, code in my repository doesn't compile, probably code in main repository compile! 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5dea8ae4.1c69fb81.cd5a1.857c%40mx.google.com.

Keith Davies

unread,
Dec 6, 2019, 12:19:21 PM12/6/19
to sou...@googlegroups.com

Dario Cdj

unread,
Dec 6, 2019, 12:24:41 PM12/6/19
to sou...@googlegroups.com
Yes man 

To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/5dea8d96.1c69fb81.62396.62a1%40mx.google.com.
Reply all
Reply to author
Forward
0 new messages