Esp32 cam settings via console?

[Kadmin]

I have flashed the tasmota esp32cam binary and it's working fine.   What I need/want to do is set some thing like frame rate, contrast, etc.  Is that possible via the web console?  Is so where can I find a list of valid commands?

[Philip Knowles]

If you look on the ESP32 page there is a list of commands for cameras contrast is mentioned but not frame rate

Get Outlook for Android

---

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of Kadmin <keble...@gmail.com>
Sent: Wednesday, January 13, 2021 1:56:49 AM
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: Esp32 cam settings via console?

 

I have flashed the tasmota esp32cam binary and it's working fine.   What I need/want to do is set some thing like frame rate, contrast, etc.  Is that possible via the web console?  Is so where can I find a list of valid commands?

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/4075bfd7-a137-40c8-a52b-23564f375c4fn%40googlegroups.com.

[Kadmin]

I had already looked for such at Tasmosta site.   i.e.

https://tasmota.github.io/docs/ESP32/

https://tasmota.github.io/docs/Commands/#esp32

but none of the pages I find mention commands for camera binary.

I just searched again and can't find the commands you mention.  Can you help out with a url.  thx.

[Philip Knowles]

ESP32 Support (Beta development) - Tasmota

There are some commands in this section

 

Sent from Mail for Windows 10

 

From: Kadmin
Sent: 15 January 2021 15:37
To: TasmotaUsers
Subject: Re: Esp32 cam settings via console?

 

I had already looked for such at Tasmosta site.   i.e.

https://tasmota.github.io/docs/ESP32/

https://tasmota.github.io/docs/Commands/#esp32

but none of the pages I find mention commands for camera binary.

 

 

I just searched again and can't find the commands you mention.  Can you help out with a url.  thx.

 

On Tuesday, January 12, 2021 at 10:20:21 PM UTC-8 knowles...@gmail.com wrote:

If you look on the ESP32 page there is a list of commands for cameras contrast is mentioned but not frame rate

Get Outlook for Android

 

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of Kadmin <keble...@gmail.com>
Sent: Wednesday, January 13, 2021 1:56:49 AM
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: Esp32 cam settings via console?

 

I have flashed the tasmota esp32cam binary and it's working fine.   What I need/want to do is set some thing like frame rate, contrast, etc.  Is that possible via the web console?  Is so where can I find a list of valid commands?

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/4075bfd7-a137-40c8-a52b-23564f375c4fn%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.

To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/6ba086fb-04ae-4fe4-a300-8569894511dan%40googlegroups.com.

 

[sfromis]

Commands are visible in the driver. https://github.com/arendst/Tasmota/blob/development/tasmota/xdrv_81_webcam.ino#L22-L57
Additionally, the command "wc" exists to display settings values.

[Kadmin]

@sfromis, that was what I needed  Thx..

I can report that I can set them except WcRtsp which is "unknown".

[sfromis]

The "(if defined ENABLE_RTSPSERVER)" means that compiling with ENABLE_RTSPSERVER is needed if you want to have RTSP enabled.