RE: Neo Coolcam smart plug reflashed with Tasmota

2,084 views
Skip to first unread message

Sebastian Lorenzen

unread,
May 29, 2018, 11:41:11 AM5/29/18
to SonoffUsers

Cool stuff!

How good is the hardware quality? This all looks a bit thin.

What settings have you used in the programmer?

 

Thanks,

Sebastian

 

From: sonof...@googlegroups.com <sonof...@googlegroups.com> On Behalf Of flyn...@gmail.com
Sent: Tuesday, May 29, 2018 5:17 PM
To: SonoffUsers <sonof...@googlegroups.com>
Subject: Neo Coolcam smart plug reflashed with Tasmota

 

For those of us that live in an EU country that uses the EU style mains plugs....This small wifi enabled socket is available from both Banggood and Aliexpress for around $14

 

Successfully re-flashed with Tasmota firmware.

 

Scratch the sticker to reveal the securing screw

 

 

Remove the top cover

 

 

Bend up the earth tag

 

 

Unsolder the antenna wire from the patch antenna

 

 

Remove the two screws that secure the circuit boards to the input pins

 

 

Tease the circuit board out from the housing - watch out for the button cap

 

 

Unsolder the J4 board connector

 

 

Pull the top board from the rest of the assembly and turn it over to reveal the required programmer connection points

 

 

Solder leads onto the 3v3,GND,TXD, RXD and GPIO0

 

 

connect 3v3, GND, TXD and RXD to your programmer in the normal way.

Connect GPIO0 to GND - plug your programmer into your USB and program the Neo

 

Check the upload with the serial monitor and if ok remove your wires and re-assemble in the reverse order..

 

--
You received this message because you are subscribed to the Google Groups "SonoffUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
Visit this group at https://groups.google.com/group/sonoffusers.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/e556b4a1-3f2d-4f49-b5a0-61563651409e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Message has been deleted

Sebastian Lorenzen

unread,
May 30, 2018, 6:36:53 AM5/30/18
to SonoffUsers

Btw, did anybody tried to get the motion detectors work with tasmota?

https://www.aliexpress.com/item/-/32858092472.html

 

Sebastian

Reply all
Reply to author
Forward
Message has been deleted
Message has been deleted
0 new messages