Skip to first unread message
Federico Chiesa
May 25, 2018, 2:32:20 PM5/25/18
to SonoffUsers
My house's electrical system is brand new(2015) and we have electronic relays for lights, so in the wall we have push buttons(monostable) instead of the classic light switches(bistable). I tried everything, but I can't get the Sonoff with the Tasmota firmware to accept the push buttons in our wall as if they were the onboard button. The Sonoff expects a bistable switch, so the light only comes on if we hold the button down. Is there any solution to this? Am I missing something?
Kenan Ahmetspahic
May 25, 2018, 2:34:39 PM5/25/18
to SonoffUsers
What are the settings in your config input?
Oxyandy
May 26, 2018, 4:51:41 AM5/26/18
to SonoffUsers
Look in wiki for Tasmota - switchmode.. you want button. (toggle)
Or create a rule so everytime GPIO14 fires, the output toggles
Or create a rule so everytime GPIO14 fires, the output toggles
Pablo Baldovi
May 28, 2018, 2:07:46 PM5/28/18
to Kenan Ahmetspahic, SonoffUsers
I soldered a pushbutton to a classic sonoff and it worked without problems.
On Fri, May 25, 2018 at 3:34 PM Kenan Ahmetspahic <ken...@gmail.com> wrote:
What are the settings in your config input?
--
You received this message because you are subscribed to the Google Groups "SonoffUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
Visit this group at https://groups.google.com/group/sonoffusers.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/981c4d2f-b04d-49fb-9905-e0a2cf88462b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Pablo Baldoví Cloud Specialist / Innovation
| ||
Sent with G Suite
Reply all
Reply to author
Forward
0 new messages