Newbie Rules Question

[Markus Waldhauser]

Hi sorry for my dumb question, but I can not solve my problem by myself.

Using Sonoff Basic 3 with Tasmota 9.4 KNX Firmware.

I can switch the basic on & off using KNX telegrams. So far so good.

But what I really want to do.

When KNX Telegram for adress 1/1/150 value 1 is received switch on immediatly.

When KNX Telegram for adress 1/1/150 value 0 is received switch off with delay of 20 seconds.

Can you help me please?

Regards, Markus

[Philip Knowles]

The easiest way is to create a virtual relay on a spare GPIO – Relay2. Use your KNX Telegram to turn that on and off then create

Rule1 on power2#state=1 do power1 1 endon on power2#state=0 do backlog delay 200; power1 0 endon

 

Regards

 

Phil K

 

Sent from Mail for Windows 10

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/b037e2eb-b908-48af-91ac-b038de11c38cn%40googlegroups.com.