Wemos (Lolin) D1 Mini (v 3.1.0) - Tasmota 5.14.0 - Build and Upload OK - No Wifi

[Jean-Christophe]

Hello,

My success so far are limited to build and upload the firmware to the D1 Mini using VSC + PlatformIO. The wiki gave me all information I needed.

However, I don't manage to get the wifi working.

I tried to enter my SSID and Password in the user_config.h file, without success. The access point don't list it as client (and the IP doesn't answer to ping, of coure).

I tried to let all by default. No wifi network appears. 

I had a lot of success a few month ago with the Sonoff 4CH Pro Module and Tasmota 5.8.0q. I was confident :)

Any help would be appreciated.

Thanks a lot, gentlemen, for your hard work. This piece of software amaze me!

[Jean-Christophe]

For some reason, the answer from Flynn O'Flattery was not added to the board.

Here is is answer and solution :-)

try changing the #define CFG_HOLDER from 0x20161209 to 0x20161208  (or whatever you have as the value in your version) and re-flashing, if successful change it back to the original value and re-flash again. It will force a flash update.

user_config.h    line 50   (in my version) 

It works! Thanks a lot :)

[flyn...@gmail.com]

Thanks for the credit Jean-Christophe, yours was not the only reply I made yesterday to not be posted on the group...I guess I had a brain-fart day and posted direct emails.......