Tasmota / turn on relay for specific time in ms

[Lukas Koval]

Dear friends,

I got an question. I would like to use tasmota to handle parking gate. 

In that case I need

1. if i send MQTT cmd/tasmota_xyz/POWER1 then relay will turn on just for few miniseconds then turn off

2. isolate buttons and relays, so the buttons will not react to relays

3. buttons on/off state will init MQTT announcement regarding state change

O appreciate your help

Lukas

[Philip Knowles]

Please read the documents

Item 1 can be easily done using pulsetime or blink – see the Commands page

Item 2 not sure if you always want to isolate the buttons or just when gate operating but, again, that’s in the Buttons and Switches page of the documents

Item 3 again in the Buttons and Switches page plus in the Rules page and examples

 

Regards

 

Phil K

 

Sent from Mail for Windows 10

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/3bdef175-1214-473c-a7cc-98e651c1038cn%40googlegroups.com.

 

[Lukas Koval]

Thanks for your answer, it helped however ....

I totally stuck on RULE definition. None of rule I configured is started. Any kind of help is more then welcome

09:55:41.881 MQT: stat/tasmota_264EFD/RESULT = {"Rule1":{"State":"ON","Once":"OFF","StopOnError":"OFF","Length":36,"Free":475,"Rules":"ON Switch8#State=3 DO Power2 1 ENDON"}}

It should react on Switch8, and turn on relay2, however no reaction

What's wrong?

[Lukas Koval]

Issue solved