Martin Jerry SD01

[R Casorso]

just wondering if anyone has used the  Martin Jerry SD01.  They are "pre-flashed" with tasmota but I have been unable to connect and the user manuals are limited at best.  After some trial and error I found that if you hold the power button down for 10+ seconds it goes into host mode and will act as dhcp server (192.168.175.1).  I can connect with my laptop but it refuses web connection request.  

Any wisdom?

Thanks

Ron

[Philip Knowles]

I suspect that you might need to manually set your laptop ip to 192.168.175.2 with a subnet mask of 255.255.0.0.

Otherwise try Device Recovery - Tasmota

Device Recovery - Tasmota - GitHub Pages Procedure~. Cut power from the device completely for 30 seconds; Power the device on and off six times with intervals lower than 10 seconds and leave it on after seventh time. tasmota.github.io

---

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of R Casorso <rvca...@gmail.com>
Sent: 19 March 2025 19:39
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: Martin Jerry SD01

 

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/sonoffusers/1a9f274c-bffa-4c28-97e3-6aef281ee53dn%40googlegroups.com.