Tasmota on IR RF controller JS-A1 315+433MHZ

[Pentis Pent]

Hello,

I have flashed tasmora on JS-A1 with RF, i got IR to work but i can't get RF and can't find any documentation. I find only for the IR model on google

Any ideas?

[Philip Knowles]

If it’s the same as the Sonoff details are here

Sonoff RF Bridge 433 - Tasmota

Templates are available at Blakadder’s site

 

Regards

 

Phil K

 

Sent from Mail for Windows 10

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/cf3f1754-970f-48b2-a6a9-1199ddda4213n%40googlegroups.com.

 

[Pentis Pent]

Thanks, already tried that, not working :)

[Pentis Pent]

https://tasmota.github.io/docs/devices/TYWE3S/

Also tried with the GPIO as instructed here ( Tuya Rx ) / ( Tuya Tx ) and tried RFrevc on all GPIOs and still not receiving RF signals from a simple remote(that was working before flashing)

https://tasmota.github.io/docs/TuyaMCU-Devices/

The weird part is when I'm trying the RF remote I get the below for all buttons

00:04:49.582 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:05:26.150 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:05:28.156 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:06:40.185 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:06:41.955 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:07:26.614 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:07:28.773 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}
00:08:58.729 RSL: RESULT = {"IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x6A811EE","DataLSB":"0x60158877","Repeat":0}}

I don't know if the TYWE3S is using serial to communicate with the RF module, also maybe the RF module is at 315?