Loop timer for Realy1

[sampu]

Am a newbie to Tasmota and to this forum. Device : Sonoff basic . Query : wish to operate Relay1 in the following sequence ; ON for 1 minute ; OFF for 3 minutes ; REPEAT this ON-OFF cycle for 8 to 12 times ; Condition, " if Switch1 is closed "; Keep the Relay1 in ON state when pre-set number of cycles is reached. Thanks to any pointers where an answer is already available.

[Philip Knowles]

Blinkcount1 8 and blinktime1 1200. Trigger with power1 3. That will give you 2 minutes on and 2 minutes off repeated 8 times. To make it 3+1 would need some rules. Power1 1 would allow you to keep it on at the end

 

 

Sent from Mail for Windows

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/a5757a1b-b060-488f-ad0b-731a06e022b7n%40googlegroups.com.

 

[sampu]

Thanks for your help. I will try your suggestion.