Skip to first unread message
Qba_
Apr 7, 2020, 3:22:40 PM4/7/20
to TasmotaUsers
Hi,
quite new for Tasmota but already few units flashed. Currently I am trying to find pins for Gosund P1 power strip with energy meter. Found already pins for Relays and LEDs and even CF1 for current/voltage metering. But I am unable to find pins responsible for CF and SEL for power metering using standard procedure for unknown units (as it does not mention power metering).
It is ESP8285. Any idea/link?
George Ioakimedes
Apr 9, 2020, 8:35:56 AM4/9/20
to TasmotaUsers
Try looking at https://tasmota.github.io/docs/devices/Gosund-SP1/ and https://templates.blakadder.com/ has a lot of templates for devices
Qba_
Apr 9, 2020, 1:46:07 PM4/9/20
to TasmotaUsers
Not SP1 (plug) but P1 (3-plug + USB strip). And I did.
But shortly expected as I found solution.
Frank Kintrup
May 18, 2020, 3:27:08 AM5/18/20
to TasmotaUsers
Hi Qba,
any advice on how to flash Tasmota to this device? Just solder cable to TX and RX and flash like many other ESP devices?
Thanks!
Qba_
May 18, 2020, 4:28:43 AM5/18/20
to TasmotaUsers
Hi Frank, I did it without soldering, by Tuya Convert.
Reply all
Reply to author
Forward
0 new messages