Momentary Press for relay

[John Williamson]

I might be approaching this in completely the wrong way....

So I ripped apart an old Somfy remote and wired it up to a Wemos Mini D1 with latest Tasmota to control a Somfy motor.

My configuration is currently like this:

When I physically press a button on the remote (a momentary switch) it presses and immediately releases and the motor continues to run until it reaches it's limits. Using the toggle on the tasmota web main menu it seems to be like holding the button down physically. Is there an easy way to press and immediately release?

Thanks in advance,

John

[Philip Knowles]

You don’t seem to have an input but it may be that you are only using it remotely.

The answer is probably pulsetime. Pulsetime 5 will blip the relay for 0.5 seconds

Regards

 

Phil K

 

Sent from Mail for Windows

 

From: John Williamson
Sent: 31 August 2021 09:21
To: TasmotaUsers
Subject: Momentary Press for relay

 

I might be approaching this in completely the wrong way....

 

So I ripped apart an old Somfy remote and wired it up to a Wemos Mini D1 with latest Tasmota to control a Somfy motor.

 

My configuration is currently like this:

 

When I physically press a button on the remote (a momentary switch) it presses and immediately releases and the motor continues to run until it reaches it's limits. Using the toggle on the tasmota web main menu it seems to be like holding the button down physically. Is there an easy way to press and immediately release?

 

Thanks in advance,

 

John

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/7e5cbd6c-2c66-43f5-aa46-d39f73c6c8f6n%40googlegroups.com.

 

[John Williamson]

You super star. That works perfectly. Thanks so much