ESP32C6 and Vcc

[Ulf Holt]

I know that esp8266 supports Vcc, but is it possible to implement this when I use an ESP32C6 module, and if so, how? Have tried to use pio to compile, but looks like I get a problem compiling BLE, which  is already implemented in ESP32c6.factory.bin. Cannot find one of the .h files needed by BLE.

This is not urgent, just nice to have.

Best regards

Ulf H

[Philip Knowles]

Have you tried TasmoCompiler?

If that doesn't work then the specs say that some GPIO can be configured as ADC and then use a 1k/2k divider network...

---

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of Ulf Holt <ulf....@gmail.com>
Sent: 13 April 2026 11:48
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: ESP32C6 and Vcc

 

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/sonoffusers/6bf5e0fa-6bdd-4339-be43-56c55b37b157n%40googlegroups.com.