Ability to write the Tasmota log to the Synology NAS

[Marco van Veelen]

Hi,

after every reboot, the logfile of the Sonoff with Tasmota firmware is emptied. I was wondering if it is possible to write the log to the Synology log folder. If so: how ?

[Don Willingham]

Can you enable a syslog server on the Synology?

[Marco van Veelen]

As far as I know: yes.

I followed the instructions for the Synology: BSD selected, TCP 514, but how do I set up the Sonoff / Tasmota to write it to that log?

Op zondag 16 juli 2017 15:19:11 UTC+2 schreef Don Willingham:

[Don Willingham]

You can define SYS_LOG_HOST and SYS_LOG_LEVEL before you (initially) compile and upload, or you should be able to find those settings in the http interface.

[Ash Scott]

Have you got this working? I installed Log Center on the synology and set it up but I'm not receiving any logs.

What settings do you have?

[Piotr Antczak]

Try the command "syslog" with value > 0

LogHost 

LogPort

SysLog > 0 

--
You received this message because you are subscribed to the Google Groups "SonoffUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Piotr Antczak

[Ash Scott]

I found the solution. For anyone else needing to do this, the Synology Log Center needs to be set as below:

On the Tasmota flashed device it needs to be set as below (set IP address as per your Synology):