Sonoff Dual R3 - buttons configuration
Marc Lacuisse
Hi there,
My goal is to use Sonoff Dual R3 to control my electric shutters.
I successfully flashed Tasmota 9.3.1.2 to all my modules and set them to shutter mode as explained on the doc (https://tasmota.github.io/docs/Blinds-and-Shutters/)
Restart // ensure the shutter mode to display specific menu
ShutterMode 1// normal operation = first relay: off/down, second relay: Off/up
Interlock ON // Enable Interlock
ShutterRelay1 1 // 2switches
ShutterButton1 1 100 50 74 100 0 0 0 1 1 // Configure down speed
ShutterButton1 2 0 50 24 0 0 0 0 1 1 // Configure up speed
I can remotely control the opening and closing of the shutters as expected.
My main concern now is the 2 buttons per module configuration (nb : these are buttons and not switches). I’ld like to use buttons as follow : one will be used for opening with a short press, the other one (short press once again) will be for closing. A dual press on any of these buttons will stop the shutter.
I tried to follow the doc https://tasmota.github.io/docs/Buttons-and-Switches/#button but without any success until now. So far, a short press on any button will activate shortly one of the relays and a long press… well, relay is activated as long as you press the button!
Any help would be welcome, thanks!
Marc