Shelly Dimmer 2 with Tasmota 9.5.0: Dimmer buttons don't work

[John Volkering]

Hi there,

i have a Shelly Dimmer 2 flashed with Tasmota 9.5.0 and Dimmer Co-processor Version v51.6.

I have configured switchmode1 and switchmode2 to 11.

I like sw1 to dim up and sw2 to dim down.

The current behaviour is that with both push buttons i can switch the lamp on/off, but i am not able to dim the light with the buttons.
Is it required to do any additional rule configuration for the dim function to work with the push buttons or does it supposed to work out of the box?

If rules, i am new to this, so i need some guidance please...

The Dimmer works fine from the webinterface or through MQTT. Only the buttons dont work.

I tested this with the default firmware and that works as expected, so i know the wiring of the buttons is correct.

[Philip Knowles]

Have you followed the guidance here?

Shelly Dimmer 2 Dimmer Module Template for Tasmota (blakadder.com)

 

Regards

 

Phil K

 

Sent from Mail for Windows

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/c73905b0-e55b-464e-b123-140a9c1b5886n%40googlegroups.com.