Re: BMX280 not detected

[Philip Knowles]

If it's BMP280/BME280 it should work with the sensors pre-compiled bin so I would try that first.

---

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of Ulf Holt <ulf....@gmail.com>
Sent: 14 July 2024 15:16
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: BMX280 not detected

 

I want to use BMX280 devices withTasmota, but it does not seem to  work. I found someone pointing to an old version og tasmota_sensors, which I tried to install, and then it was no problem, but the latest version seem not to work. I have tried to compile using #define USE_BMPbut when I try using i2cscan from the consol, nothing is found. Is this suposed to work, and if so,

what might I be doing wrong?

Best regards

Ulf H.

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/c4ad32b1-c449-425b-a239-fdab9228ed66n%40googlegroups.com.