Send JSON to tasmota to control multiple relays in one command ?

[Craig Curtin]

Guys,

Tasmota 11 on an ESP8266 with an 8 channel relay board - i have setup the relays in an interlocked fashion (manually) so that when Relay 1 is in the off position it feeds the common of relay 2 etc etc.

I would like to be able to send the command to Tasmota (through MQTT) to turn off and on certain combinations of relays - i can not find any specific examples

I would have thought it would be something like 

{POWER1: OFF, POWER2: ON} as an example - but this seems to be ignored 

Does anyone know if this is possible or do i have to send them all as discrete commands ?

Craig

[Philip Knowles]

You have two main options.

Use Backlog as the 'main' command and power1 0; power 2 1 as the payload.

Or use events and use a rule triggered by the event.

See the commands and rules pages respectively

Regards

Phil K

Get Outlook for Android

---

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of Craig Curtin <craig....@gmail.com>
Sent: Wednesday, May 11, 2022 10:36:29 PM
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: Send JSON to tasmota to control multiple relays in one command ?

 

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/6dc9b6b0-2d76-486d-bb06-a2aeb884b668n%40googlegroups.com.