Shelly1plus

joel gerardi

unread,

Mar 21, 2025, 2:19:24 PMMar 21

to TasmotaUsers

I have been having quite a time with these things. I tried to flash 3 of them OTA using the shelly web gui. Got so far as to enter my wifi credentials and on reboot i bricked all 3 of them. I have tried to flash using the web installer and it says it has completed succesfully but i get no tasmota ssid after boot.

Any thoughts?

Philip Knowles

unread,

Mar 21, 2025, 4:19:59 PMMar 21

to joel gerardi, TasmotaUsers

It's worth reading this - v1.1+ can't be flashed OTA and some versions need solo.bins

Shelly Plus 1 Switch Module (SNSW-001X16EU) Configuration for Tasmota

Shelly Plus 1 Switch Module (SNSW-001X16EU) Configuration for Tasmota - Blakadder’s Smarthome Shenanigans

WARNING!!! Devices with firmaware v1.10+ cannot be flashed OTA anymore. Auto-configuration After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration.Select your device from the drop-down and click Apply Configuration. The device will restart and will be automagically configured.

templates.blakadder.com

From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf of joel gerardi <joelg...@gmail.com>
Sent: 21 March 2025 18:19
To: TasmotaUsers <sonof...@googlegroups.com>
Subject: Shelly1plus

I have been having quite a time with these things. I tried to flash 3 of them OTA using the shelly web gui. Got so far as to enter my wifi credentials and on reboot i bricked all 3 of them. I have tried to flash using the web installer and it says it has completed succesfully but i get no tasmota ssid after boot.

Any thoughts?

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/sonoffusers/f9c5937d-eef3-4204-a602-a8206adb7a5dn%40googlegroups.com.

joel gerardi

unread,

Mar 23, 2025, 8:58:50 AMMar 23

to TasmotaUsers

I have read this. I have several of these. Both the single and dual core as mentioned in the article. I have tried both the solo1 as well as tasmota32. They all seem to flash fine but once done, i reboot and have no way to connect to it. It doesnt show the ssid for the tasmota. I literally have 7 of these which are all bricked. I did manage to get one working but im not even sure how.