Sonarcloud Swift Code Coverage

[sebastian...@gmail.com]

Hi,

we are trying to get our swift code coverage to show up in sonarcloud (private project) but no success. The scanner prints:

13:11:10.096 INFO: 20/20 source files have been analyzed

13:11:10.104 INFO: Parse coverage report (report)

13:11:10.115 INFO: Sensor Swift Squid Sensor [swift] (done) | time=3607ms

Even in debug mode there is no more output. The coverage report is generated in the llcov format and the "sonar.swift.coverage.reportPath" is set. The files are present in the location the report mentions.

Any way we can debug this further?

Regards,

Sebastian

[nicolas...@sonarsource.com]

Hi Sebastian,

Few starting points to further debug this:

• check documented guidance on this topic
• compare inputs/outputs with the open-source example provided here: https://github.com/SonarSource/sonar-scanning-examples/tree/master/swift-coverage .
  

Best regards,

Nicolas

[sebastian...@gmail.com]

Hi Nicolas,

thanks for the hint. We where able to identify the issue now. The report file did contain absolute path values that did not match the folder of the source during the scan. We knew about this and created symlinks so that the directories where present. The Scanner does not seem to handle these properly though. We know correct the paths in the report file and with that, it works :)!

Regards,

Sebastian 

[Nicolas Bontoux]

Great ! Thanks for the update.

Nicolas

--
You received this message because you are subscribed to a topic in the Google Groups "SonarQube" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/sonarqube/hjw1WP19oNg/unsubscribe.
To unsubscribe from this group and all its topics, send an email to sonarqube+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sonarqube/7e479b70-989b-4dbd-8456-b8c932b7f47f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Nicolas Bontoux | SonarSource

Support Engineer

http://sonarsource.com