HIH6130

[Tom Morrison]

I may be wiring up a HIH6130 to a SolderCore and noticed the availability of the library that would make accessing the device easy.  However, a small code snippet would be helpful to make sure I do this correctly the first time, as I may be in a bit of a rush.

Also, as I recall from other applications, the CL and DA lines need to be pulled to 5Vdc via something like a 10K resistor--correct?

Thanks, in advance, for any guidance!

[Paul Curtis]

Hi,

I think that device  works at a range of voltages; you might want to use 3.3V for the SolderCore.  But yes, you need I2C pull-ups.

— Paul. 

--
--
You received this message because you are subscribed to the Google
Groups "SolderCore" group http://groups.google.com/group/soldercore?hl=en

---
You received this message because you are subscribed to the Google Groups "SolderCore" group.
To unsubscribe from this group and stop receiving emails from it, send an email to soldercore+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.