I just got an Alpha AXP 150, with <beep> NT installed on it.
Of course I want to install something normal on it.
As I've seen, that it has a really old firmware, I decided to update it. I
got to the ARC console, and then chose Update Firmware, and inserted the
Compaq Firmware CD 5.5 . Now the firmware is updated, and I have
power-clycled the machine. One BIG Problem, I can't solve:
He sais I have to run the ECU (Eisa Configuration Utility) from Floppy,
but I don't have such a floppy, and I can't find it online on the web,
either!
Can anybody please give me a Image of this Floppy (ECU for AXP150 (aka
Jensen))??
If I switch to SRM and enter b dka400 (CD-ROM) it won't boot from CD
(won't matter if I insert NetBSD, Tru64 or OpenVMS), and just gives 84
FAIL.
If you have such a floppy, can you just type:
dd if=/dev/fd0 of=/floppyimg.img
and then send me floppyimg.img or place it on a anon-FTP Server???
Many Many thanks in advance
--
Best Regards,
Freddy
=====================================================================
Frederik Meerwaldt Homepage: http://www.freddym.org
Bavaria/Germany OpenVMS and Unix Howtos and much more
FREEBSD, NETBSD, OPENBSD, TRU64, OPENVMS, ULTRIX, BEOS, LINUX
I have the same problem... search this f*** disk..
Greets
Eric
I'll put one on ftp://www.tcja.nl/ftp/pub/wilko later today. Stay tuned.
W/
--
Wilko Bulte http://www.freebsd.org "Do, or do not. There is no try"
wi...@freebsd.org http://www.nlfug.nl Yoda - The Empire Strikes Back
OK, the image is now at ftp://www.tcja.nl/pub/wilko
Enjoy..
Thanks a lot... I don't know what to say... It's... fantastic!!!
Now I can finally install NetBSD on this cute machine.
> Wilko Bulte http://www.freebsd.org "Do, or do not. There is no try"
I do!!! I'm writing this on a FreeBSD machine.
I like happy people ;-)
--
Wilko Bulte http://www.freebsd.org "Do, or do not. There is no try"