How To Install DRB III Emulator Software For Witech 2 Witech Micropod 2 Interface

[Jane Bottone]

How to Install DRB III Emulator Software For Witech 2 Witech Micropod 2 Interface

If you are a Chrysler, Jeep or Dodge owner or technician, you may have heard of the DRB III Emulator software. This software allows you to use a wiTECH Micropod 2 interface to access the diagnostic functions of the DRB III scan tool, which is no longer supported by the manufacturer. The DRB III Emulator software can help you diagnose and repair vehicles from 1998 to 2007 that use the DRB III protocol.



How to Install DRB III Emulator Software For Witech 2 Witech Micropod 2 Interface

Download File https://t.co/5LyzlL318n







However, installing the DRB III Emulator software is not a straightforward process. You need to have the right hardware, software and entitlements to make it work. In this article, we will guide you through the steps to install the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface on a Windows 7 Pro 32-bit computer.



What You Need

Before you start, make sure you have the following items:




A wiTECH Micropod 2 interface that has entitlements for the Enhanced DRB III Emulator. This is different from the entitlements for the wiTECH Diagnostic Application (wiTECH 1.0) or the Original DRB III Emulator. You can check your entitlements by contacting the FCA wiTECH Help Desk.
A Windows 7 Pro 32-bit computer that has the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software. You can download and install the wiTECH Diagnostic Application (wiTECH 1.0) from DealerCONNECT (DealerCONNECT > Service > wiTECH Information > Legacy Tools > wiTECH Software Installer).
A USB-microUSB cable or a wireless network to connect the wiTECH Micropod 2 interface to the computer.
A vehicle that uses the DRB III protocol and an OBDII port to connect the wiTECH Micropod 2 interface to the vehicle.


How to Install

Follow these steps to install the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface:




Start with a fresh install of Windows 7 Pro 32-bit on your computer.
Install all the necessary drivers for your laptop.
Set the clock to the current date and time.
Connect to WiFi and perform all necessary Windows Updates.
Copy the wiTECH_Install folder to the desktop.
Install the provided version of Adobe AIR.
Install the provided version of Java.
Install wiTECH.
Connect the wiTECH Micropod 2 interface that will be used with Enhanced DRB III Emulator to your computer either through the USB-microUSB cable or by plugging it into a vehicles OBDII port and having both the device and the computer on the same wireless network. You can add a wireless profile to the device by following this link: https://kb.fcawitech.com/article/330/how-to-configure-wireless-settings-on-a-micropod-ii-setup-for-enhanced-drb-iii-emulator-832.html
Open the wiTECH Diagnostic Application (wiTECH 1.0) and look for the device in the connection wizard. The device name should be wiTECH 1.0 microPod. It should be discovered over Wi-Fi and USB.
Once the device is found in the connection wizard, click on its name. This will cause the Launch DRB III Enhanced button to appear next to the Next button in the bottom right corner. If you see Launch DRB III without Enhanced, you need to contact the Help Desk to get the Enhanced entitlements added.
Click the Launch DRB III Enhanced button and accept the EULA that is presented. A warning will appear indicating that Enhanced DRB III Emulator is not installed. Press OK to start the installation process.
The wiTECH Diagnostic Application (wiTECH 1.0) will now close and the Enhanced DRB III Emulator Stub will begin to install. Follow any dialog prompts to continue the installation.
With the Enhanced DRB III Emulator Stub installed, select the check box for Enhanced DRB III Emulator Application vx.xx.xxxx and click the Install button in
the bottom right corner of the window.
Follow any dialog prompts to complete installation. Once installation has completed, open
the wiTECH Diagnostic Application and select
the device using
the Connection Wizard.


How to Use

To use
the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface, follow these steps:




Connect
the device
to
the vehicles OBDII port and
to
the computer either through
the USB-microUSB cable or over Wi-Fi.
Open
the wiTECH Diagnostic Application (wiTECH 1.0) and select
the device using
the Connection Wizard.
Click on
the Launch DRB III Enhanced button and accept
the EULA that is presented.
The Enhanced DRB III Emulator software will open and display
the vehicle information and
the available diagnostic functions.
Select
the function you want
to perform and follow
the on-screen instructions.


Conclusion

The DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface is a useful tool for diagnosing and repairing older Chrysler, Jeep and Dodge vehicles that use
the DRB III protocol. However, installing it requires some preparation and attention
to detail. By following this guide, you should be able
to install and use
the software without any problems. If you encounter any issues or need any assistance, please contact
the FCA wiTECH Help Desk for support.







What is DRB III Emulator Software

The DRB III Emulator software is a program that simulates the functions of the DRB III scan tool, which was the original diagnostic tool for Chrysler, Jeep and Dodge vehicles from 1998 to 2007. The DRB III scan tool used a proprietary protocol called DRB III to communicate with the vehicle's electronic control units (ECUs) and perform various diagnostic tests and procedures.



The DRB III Emulator software allows you to use a wiTECH Micropod 2 interface, which is a newer diagnostic device that supports multiple protocols, to access the DRB III functions on your computer. The wiTECH Micropod 2 interface acts as a bridge between the vehicle's OBDII port and the computer's USB port or wireless network. The DRB III Emulator software runs on the computer and displays the same menus and screens as the DRB III scan tool.



The DRB III Emulator software can help you diagnose and repair many problems that may occur on older Chrysler, Jeep and Dodge vehicles that use the DRB III protocol. You can read and clear trouble codes, view live data, perform actuator tests, program keys, reset modules, reflash ECUs and more.



Why You Need DRB III Emulator Software

If you own or work on older Chrysler, Jeep or Dodge vehicles that use the DRB III protocol, you may need the DRB III Emulator software for several reasons:




The DRB III scan tool is no longer supported by the manufacturer and may not be available for purchase or repair.
The DRB III scan tool is not compatible with newer vehicles that use different protocols such as CAN or J1850.
The DRB III scan tool is bulky and requires a separate power supply and cables to operate.
The DRB III Emulator software is more convenient and cost-effective than the DRB III scan tool. You can use a wiTECH Micropod 2 interface that supports multiple protocols and vehicles. You can also use your own computer and wireless network to run the software.
The DRB III Emulator software is updated regularly by the manufacturer and can provide more features and functions than the DRB III scan tool.


By installing and using the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface, you can save time and money while providing better service and repair for your older Chrysler, Jeep or Dodge vehicles.



What are the Benefits of DRB III Emulator Software

The DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface has many benefits for both vehicle owners and technicians. Here are some of them:




The DRB III Emulator software can access all the diagnostic functions of the DRB III scan tool, which is essential for troubleshooting and repairing older Chrysler, Jeep and Dodge vehicles that use the DRB III protocol.
The DRB III Emulator software can perform advanced functions such as key programming, module resetting, ECU reflashing and more, which are not possible with generic OBDII scanners or other diagnostic tools.
The DRB III Emulator software can work with multiple vehicles and protocols, as long as you have a wiTECH Micropod 2 interface that supports them. You can switch between different vehicles and protocols easily and quickly.
The DRB III Emulator software can save you time and money by allowing you to diagnose and repair your vehicle at home or in your shop, without having to visit a dealer or buy an expensive and outdated DRB III scan tool.
The DRB III Emulator software is updated regularly by the manufacturer and can provide more accurate and reliable diagnosis and repair than the DRB III scan tool, which may have outdated software or hardware issues.


What are the Limitations of DRB III Emulator Software

While the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface is a powerful and useful tool, it also has some limitations that you should be aware of. Here are some of them:




The DRB III Emulator software can only work with a wiTECH Micropod 2 interface that has entitlements for the Enhanced version. You cannot use it with other diagnostic devices or interfaces.
The DRB III Emulator software can only work on a Windows 7 Pro 32-bit computer that has the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software. You cannot use it on other operating systems or computers.
The DRB III Emulator software can only work with vehicles that use the DRB III protocol, which are mostly Chrysler, Jeep and Dodge vehicles from 1998 to 2007. You cannot use it with newer vehicles that use different protocols such as CAN or J1850.
The DRB III Emulator software may not be able to perform some functions or access some modules on certain vehicles, depending on the vehicle model, year and configuration. You may need to consult the vehicle service manual or contact the manufacturer for more information.
The DRB III Emulator software may require an internet connection and a subscription to access some features or functions, such as ECU reflashing or key programming. You may need to contact the FCA wiTECH Help Desk for more details.


How to Troubleshoot DRB III Emulator Software

If you encounter any problems or errors while using the DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface, here are some tips to help you troubleshoot them:




Make sure you have the right hardware, software and entitlements to use the DRB III Emulator software. Check your wiTECH Micropod 2 interface, your computer, your internet connection and your subscription status.
Make sure you have installed the DRB III Emulator software correctly and updated it to the latest version. Follow the installation instructions carefully and check for any updates from the manufacturer.
Make sure you have connected the wiTECH Micropod 2 interface to your computer and your vehicle properly. Use a USB-microUSB cable or a wireless network to connect the device to your computer. Use an OBDII port to connect the device to your vehicle.
Make sure you have selected the right vehicle and protocol in the wiTECH Diagnostic Application (wiTECH 1.0) and the DRB III Emulator software. Choose the vehicle model, year and configuration that match your vehicle. Choose the DRB III protocol if available.
Make sure you have performed the diagnostic functions correctly and followed the on-screen instructions. Read the function descriptions carefully and follow any prompts or warnings that appear.
If none of these tips help, you can contact the FCA wiTECH Help Desk for further assistance. They can provide you with technical support and guidance on how to use
the DRB III Emulator software.


Conclusion

The DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface is a valuable tool for diagnosing and repairing older Chrysler, Jeep and Dodge vehicles that use
the DRB III protocol. It can simulate
the functions of
the DRB III scan tool on your computer and provide you with more features and functions than
the original tool. However, it also has some limitations and requirements that you should be aware of before using it. By following this guide, you should be able
to install, use and troubleshoot
the DRB III Emulator software without any problems. If you need any help or support, please contact
the FCA wiTECH Help Desk for assistance.



Conclusion

The DRB III Emulator software for wiTECH 2 wiTECH Micropod 2 interface is a valuable tool for diagnosing and repairing older Chrysler, Jeep and Dodge vehicles that use
the DRB III protocol. It can simulate
the functions of
the DRB III scan tool on your computer and provide you with more features and functions than
the original tool. However, it also has some limitations and requirements that you should be aware of before using it. By following this guide, you should be able
to install, use and troubleshoot
the DRB III Emulator software without any problems. If you need any help or support, please contact
the FCA wiTECH Help Desk for assistance.

a8ba361960