Issue 148 in soar: smem fails to print LTI after loading database

[so...@googlecode.com]

Status: New
Owner: ----
Labels: Type-Defect Priority-Medium

New issue 148 by bob.mari...@soartech.com: smem fails to print LTI after
loading database
http://code.google.com/p/soar/issues/detail?id=148

1) Start Soar debugger
2) smem --set learning on
3) smem --set path test2.smem (file is attached)
4) smem --set database file
5) smem -p a1

Expected: LTI object A1 prints
Actual: "Error: Invalid attribute."

As a workaround, if I print all of the LTIs ("smem -p"), then "smem -p a1"
works properly.

JSoar has the same bug, and the workaround also works.

FYI, the attached smem file is just the result of the "smem --add" example
on the smem command's wiki page.

Attachments:
test2.smem 30.0 KB

--
You received this message because this project is configured to send all
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings

[so...@googlecode.com]

Updates:
Owner: justinn...@gmail.com

Comment #1 on issue 148 by justinn...@gmail.com: smem fails to print LTI

after loading database
http://code.google.com/p/soar/issues/detail?id=148

Caused by the smem db not being connected when checking the identifier.
Fixed by connecting the db first (r13927).

[so...@googlecode.com]

Updates:
Status: Fixed

Comment #2 on issue 148 by justinn...@gmail.com: smem fails to print LTI

after loading database
http://code.google.com/p/soar/issues/detail?id=148

(No comment was entered for this change.)

[so...@googlecode.com]

Comment #3 on issue 148 by maz...@gmail.com: smem fails to print LTI after
loading database
http://code.google.com/p/soar/issues/detail?id=148

Just fyi, also happens in 9.3.1 and 9.3.2.