how to install sniper
552 views
Skip to first unread message
Wafa Benboubaker
Jul 9, 2012, 7:24:00 AM7/9/12
to snip...@googlegroups.com
hi,
i want to install sniper under ubunto but my architecture is a x86 32bits?? can i install it??and how please give me a Detailed tutorial.
thanks
Trevor E. Carlson
Jul 9, 2012, 10:28:57 AM7/9/12
to snip...@googlegroups.com
Wafa,
Currently, we are able to support multilib (package g++-multilib)
32-bit installations of Sniper on 64-bit hosts. There are a few problems
with running Sniper on 32-bit hosts directly. We will take a look at
this and see what we can do.
-Trevor
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Sniper simulator" group.
> To post to this group, send email to snip...@googlegroups.com
> To unsubscribe from this group, send email to
> snipersim+...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/snipersim?hl=en
Currently, we are able to support multilib (package g++-multilib)
32-bit installations of Sniper on 64-bit hosts. There are a few problems
with running Sniper on 32-bit hosts directly. We will take a look at
this and see what we can do.
-Trevor
> --
> You received this message because you are subscribed to the Google
> Groups "Sniper simulator" group.
> To post to this group, send email to snip...@googlegroups.com
> To unsubscribe from this group, send email to
> snipersim+...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/snipersim?hl=en
Wafa Benboubaker
Jul 9, 2012, 10:34:13 AM7/9/12
to snip...@googlegroups.com
Thanks for answer but what should i do right now it's urgent to me to install sniper to day.
please help me .
please help me .
2012/7/9 Trevor E. Carlson <trevor....@elis.ugent.be>
Wafa,
Currently, we are able to support multilib (package g++-multilib) 32-bit installations of Sniper on 64-bit hosts. There are a few problems with running Sniper on 32-bit hosts directly. We will take a look at this and see what we can do.
-Trevor
On 7/9/2012 7:24 AM, Wafa Benboubaker wrote:
hi,
i want to install sniper under ubunto but my architecture is a x86 32bits?? can i install it??and how please give me a Detailed tutorial.
thanks
--
--
You received this message because you are subscribed to the Google
Groups "Sniper simulator" group.
To post to this group, send email to snip...@googlegroups.com
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/snipersim?hl=en
--
--
You received this message because you are subscribed to the Google
Groups "Sniper simulator" group.
To post to this group, send email to snip...@googlegroups.com
To unsubscribe from this group, send email to
Trevor E. Carlson
Jul 9, 2012, 10:39:21 AM7/9/12
to snip...@googlegroups.com
Wafa,
The best thing that you could do to get it working today would be to use a 64-bit machine. That is where most of our experience is and you should see the fewest bugs there. If you have access to a 64-bit host, then it should be possible to use it. Otherwise, you will have to either wait for us to fix the 32-bit bugs, or fix them in Sniper yourself.
Sorry that we can't help with your issues right away,
Trevor
The best thing that you could do to get it working today would be to use a 64-bit machine. That is where most of our experience is and you should see the fewest bugs there. If you have access to a 64-bit host, then it should be possible to use it. Otherwise, you will have to either wait for us to fix the 32-bit bugs, or fix them in Sniper yourself.
Sorry that we can't help with your issues right away,
Trevor
On 7/9/2012 10:34 AM, Wafa Benboubaker wrote:
Thanks for answer but what should i do right now it's urgent to me to install sniper to day.
please help me .
2012/7/9 Trevor E. Carlson <trevor....@elis.ugent.be>
Wafa,
Currently, we are able to support multilib (package g++-multilib) 32-bit installations of Sniper on 64-bit hosts. There are a few problems with running Sniper on 32-bit hosts directly. We will take a look at this and see what we can do.
-Trevor
On 7/9/2012 7:24 AM, Wafa Benboubaker wrote:
hi,
i want to install sniper under ubunto but my architecture is a x86 32bits?? can i install it??and how please give me a Detailed tutorial.
thanks
--
--
You received this message because you are subscribed to the Google
Groups "Sniper simulator" group.
To post to this group, send email to snip...@googlegroups.com
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/snipersim?hl=en
--
--
You received this message because you are subscribed to the Google
Groups "Sniper simulator" group.
To post to this group, send email to snip...@googlegroups.com
To unsubscribe from this group, send email to
--
--
You received this message because you are subscribed to the Google
Groups "Sniper simulator" group.
To post to this group, send email to snip...@googlegroups.com
To unsubscribe from this group, send email to
Trevor E. Carlson
Jul 9, 2012, 10:16:10 PM7/9/12
to snip...@googlegroups.com
Wafa,
I just was looking at the 32-bit architecture support, and things are working better than I originally thought. It looks like I was mixing the 64-bit libraries on the 32-bit machine on my end, and that caused a compilation failure. I was able to compile the 32-bit version after setting the TARGET_ARCH=ia32 in Makefile.config. Also, I can run the basic fft example in test/fft. (cd test/fft ; make run). Note that we do not support x87 floating point timing estimation, and therefore applications that use those floating point operations will not have with an accurate timing result. We haven't had much use for x87 floating point as most applications we use compile on 64-bit and use SSE instructions.
Could you edit your sniper/Makefile.config file, run 'make distclean', and recompile Sniper? That should clean up the 64-bit copy of Python and it will grab a new 32-bit copy for you. Please tell us if there are any bugs that you run into. I've updated the configuration to automatically select the 32-bit version of Sniper when you are running on a 32-bit host, but that patch won't be pushed out until Sniper 3.04.
-Trevor
I just was looking at the 32-bit architecture support, and things are working better than I originally thought. It looks like I was mixing the 64-bit libraries on the 32-bit machine on my end, and that caused a compilation failure. I was able to compile the 32-bit version after setting the TARGET_ARCH=ia32 in Makefile.config. Also, I can run the basic fft example in test/fft. (cd test/fft ; make run). Note that we do not support x87 floating point timing estimation, and therefore applications that use those floating point operations will not have with an accurate timing result. We haven't had much use for x87 floating point as most applications we use compile on 64-bit and use SSE instructions.
Could you edit your sniper/Makefile.config file, run 'make distclean', and recompile Sniper? That should clean up the 64-bit copy of Python and it will grab a new 32-bit copy for you. Please tell us if there are any bugs that you run into. I've updated the configuration to automatically select the 32-bit version of Sniper when you are running on a 32-bit host, but that patch won't be pushed out until Sniper 3.04.
-Trevor
Wafa Benboubaker
Jul 10, 2012, 4:54:52 AM7/10/12
to snip...@googlegroups.com
Hi,
i have i have tested the command line makedisclean but i have the following erreur:
[CLEAN ] logs
[CLEAN ] config
[CLEAN ] deps
[CLEAN ] standalone
[CLEAN ] pin
[CLEAN ] common
[CLEAN ] sift
[CLEAN ] sift/recorder
make: *** /home/wafabenboubaker/sniper-3.03/doc/manual: Aucun fichier ou dossier de ce type. Arrêt.
make: *** [manualclean] Erreur 2
and when i recompile the sniper with make i have the same erreur :
Found Pin version 2.6.27887 in /home/wafabenboubaker/sniper-3.03/pin_kit
but at least revision 41150 is required.
make: *** [pin] Erreur 1
please please i need your help if i don't distrub you
i have i have tested the command line makedisclean but i have the following erreur:
[CLEAN ] logs
[CLEAN ] config
[CLEAN ] deps
[CLEAN ] standalone
[CLEAN ] pin
[CLEAN ] common
[CLEAN ] sift
[CLEAN ] sift/recorder
make: *** /home/wafabenboubaker/sniper-3.03/doc/manual: Aucun fichier ou dossier de ce type. Arrêt.
make: *** [manualclean] Erreur 2
and when i recompile the sniper with make i have the same erreur :
Found Pin version 2.6.27887 in /home/wafabenboubaker/sniper-3.03/pin_kit
but at least revision 41150 is required.
make: *** [pin] Erreur 1
please please i need your help if i don't distrub you
2012/7/10 Trevor E. Carlson <trevor....@elis.ugent.be>
Trevor Carlson
Jul 10, 2012, 5:56:47 AM7/10/12
to snip...@googlegroups.com
Hi,
i have i have tested the command line makedisclean but i have the following erreur:
[CLEAN ] logs
[CLEAN ] config
[CLEAN ] deps
[CLEAN ] standalone
[CLEAN ] pin
[CLEAN ] common
[CLEAN ] sift
[CLEAN ] sift/recorder
make: *** /home/wafabenboubaker/sniper-3.03/doc/manual: Aucun fichier ou dossier de ce type. Arrêt.
make: *** [manualclean] Erreur 2
and when i recompile the sniper with make i have the same erreur :
Found Pin version 2.6.27887 in /home/wafabenboubaker/sniper-3.03/pin_kit
but at least revision 41150 is required.
make: *** [pin] Erreur 1
please please i need your help if i don't distrub you
2012/7/10 Trevor E. Carlson <trevor....@elis.ugent.be>
Wafa,
I just was looking at the 32-bit architecture support, and things are working better than I originally thought. It looks like I was mixing the 64-bit libraries on the 32-bit machine on my end, and that caused a compilation failure. I was able to compile the 32-bit version after setting the TARGET_ARCH=ia32 in Makefile.config. Also, I can run the basic fft example in test/fft. (cd test/fft ; make run). Note that we do not support x87 floating point timing estimation, and therefore applications that use those floating point operations will not have with an accurate timing result. We haven't had much use for x87 floating point as most applications we use compile on 64-bit and use SSE instructions.
Could you edit your sniper/Makefile.config file, run 'make distclean', and recompile Sniper? That should clean up the 64-bit copy of Python and it will grab a new 32-bit copy for you. Please tell us if there are any bugs that you run into. I've updated the configuration to automatically select the 32-bit version of Sniper when you are running on a 32-bit host, but that patch won't be pushed out until Sniper 3.04.
-Trevor
On 7/9/2012 10:44 AM, Wafa Benboubaker wrote:
thanks you for answer<330.gif>
preeti Jain
Feb 19, 2017, 9:01:33 AM2/19/17
to Sniper simulator
Hello ,can anyone tell me how to generate trace files ,say for example i am running 1 billion instructions and i want 4 traces at 250 million sim points each ,then how to create also how to generate weights for the application for the traces ? kindly reply. i am using 32 bit machine so i have to use traces ,instead of complete application program.please reply
preeti
preeti
Reply all
Reply to author
Forward
0 new messages