homing differently

Skip to first unread message

Walter Brokowski

May 15, 2020, 3:25:57 PM5/15/20
to Smoothieware Support
I have smoothieboard 1.1 .on a kossel . It's been running fine for years.
I noticed that after the carriages hit the homing endstops: 
x is 5.4 mm from the endstop
y is 8.6 mm from the endstop
z is 4.9 mm from the endstop

I have the setting in config to be 5mm

Any idea why this is occurring?
Thanks in advance for any help

Arthur Wolf

May 15, 2020, 3:35:40 PM5/15/20
to Smoothieware Support
Please post the results of M114 and M114.1 ( and 2 etc up to 5 ) for both
* before homing
* after homing

You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/9b99bac1-bc37-4c3d-a7c1-4e701f060738%40googlegroups.com.



May 15, 2020, 3:44:29 PM5/15/20
to Smoothieware Support
that is quite normal. trim and other factors to do woth the way deltas home would explain it.

Walter Brokowski

May 15, 2020, 3:49:16 PM5/15/20
to Smoothieware Support
ok will do 
Reply all
Reply to author
0 new messages