Hp Laserjet 1018 Windows 10 Driver

0 views

Skip to first unread message

Mack Mosely

unread,

Aug 3, 2024, 5:26:04 PM8/3/24

to smarlaspebal

My last laptop was also Windows 10 (also Home, 64-bit) and the printer worked fine, and drivers were available. I still have that laptop, and it can print still using the installed drivers (version 2012.918.1.57980). So there shouldn't be any problem with the OS.

However, I can't find a standard driver download from HP. The instructions I find now are to use the in built-in Windows solution, though drivers for a 1018 aren't available there under the manufacturer 'HP', 'Hewlett Packard' or 'Hewlett-Packard'.

I have run HP Easy Start, which recognises the printer correctly, and directs me to HP Smart. HP Smart, however, cannot find my printer. HP Smart comes up with the error 'printer not connected by USB', yet devices and printers shows it as 'unspecified'.

HP Print and Scan Doctor also recognises my printer, and tells me that I need the installer for the full software solutions, and directs me to a web page that tells me to use the built-in Windows solution (which lacks anything for a 1018).

Its work, because dont have much diference. To windows 10, dont exist driver in HP site. It is recommended to plug usb and wait windows update install driver, but some times the windows 10 cant do it.

Unfortunately, when I put in HP Laserjet 1020, the HP website does not give me a driver to download. I am looking for a driver for Windows 10, 64 bit. You would think HP would adequately support their older, fully functional, printers!

Hi i have followed the advice HP have to go to win 10 and get drivers, but it is not working. could you just send me the HP laserjet driver 1018 and 1020 please. I have ended up going in circles and just can't get it to work. I have a wonderful HP1018 and it is working fine except when Win10 was re-installed they baselined and i lost the driver. i've been at this for hours! Please help!

This is so bad. When using the Scan Doctor and you try to Get Installer, it can't even find the page!!!! What are we supposed to do with our 1018 Printer? Just toss it because HP can't be bothered making the driver available? If I get a new printer, it sure won't be an HP.

I've got an HP Laserjet 1018 that works just fine on Windows Vista 64-bit. I just built a new PC and put Windows 7 Home Premium 64-bit onto it. The drivers on the HP support site don't work. When I try printing something, it gets sent to the printer and just disappears. I pause printing to see that the document actually does get sent to the printer and it shows up. As soon as I un-pause the printer, the document disappears, but nothing prints. Normally, when something is sent to the printer, the yellow "information" LED lights up momentarily and the document then prints. The LED does not light up at all. I have tried new cables, uninstalling and re-installing, etc. Nothing works. Just to be sure that it isn't a general printing problem, I hooked up a Laserjet 1020 onto the new machine and it works just fine. However, that's my work printer and I can't leave it on the new computer which is a personal computer for my home. This worked to identify that my copy of Windows 7 can indeed print, but this cannot be a long-term solution. Help?

Thanks for the post. On this one, I have a couple of ideas. I've pasted the links below. One is for the Win7/64 driver page and the print diagnostic utility. I would certainly recommend the utility to help narrow down the issue. The other is a queue related document which has some excellent information. Good Luck!

I tried to download the drivers and software from HP site. I have an HP 2009m desktop. the download goes through fine, but when asked for install, it tells me my laserjet1018 is not plugged in and is waiting for me to plug it in. I have tried different cords, different USP ports, turning it off and turning it back on, nothing is working any help given would be appreciated. SIDENOTE* I do have the printer installed on a toshiba laptop, but I do not know how to access the driver/software so I can copy it to a flash and put it on the desktop. any suggestions would be helpful

Thanks for the post. Hmmm, this one is being difficult eh? At first glance, I would agree with you, either the USB cable or the USB port on your desktop system, but since you tried both let's check the below link for some excellent t-shooting steps. Good Luck!

p910nd Print Server p910nd is a small printer daemon intended for diskless platforms that does not spool to disk but passes the job directly to the printer. Normally a lpr daemon on a spooling host connects to it with a TCP connection on port 910n...

Great wiki! Followed it to the letter and got my Laserjet 1018 to print successfully from my Asus router w/ OpenWRT. (and the scripty goodness ensures the printer works as soon as it turns on. A master stroke!)

When you select Print on Both Sides (Manually) then send a document, the odd pages are printed in descending order, then a popup appears on the Windows machine telling you to reload the pages. After you confirm, the even pages are printed in ascending order. This option works fine on my old (no longer working) TP-Link print server and of course when the printer is directly hooked up to the Windows machine.

maybe as an alternative - you coul duse 'USB over IP' driver in the openwrt box and on your PC. that would effectvely create a (remote) USB connectin from your PC to the printer. then the printer could send your PC-based printer driver the signal to give you the pop-up message.

An HP LaserJet 1022 driver 1.6.1 is mentioned in connection with the HP 5.1.1 Printer Software Update package (HP 5.1.1 Printer Software Update) from Apple. The system requirements for this 5.1.1 package from Apple say Not compatible with macOS v12 and newer, but reports (about similar printer models) seem to indicate that the download could work with macOS 12 (and even newer versions) anyway. So, you may want to try the 5.1.1 package from Apple for the LaserJet 1018, but look upon this as an experiment. If necessary, try resetting the printing system. Make sure that you have backup copies of all important files before testing anything.

known issue from what i researched and no fix from HP because they are old printers. This is the easiest way to fix the issue which could probably go into a simple batch file for your users to run themselves.

I have struggled with this for years. It has to do with the firmware on some of the 10XX printers not working right with the windows drivers. We use the files and instructions from the link below. Another thing you may try is using the windows drivers for LaserJet 5L.

Do you have a HP LaserJet 10-1022 printers and everytime someone prints a PDF file it kills the print spooler? The SDhp1020.dll was build by 2 different companies, Zenographics Inc, and by Marvell Semiconductor. The...

I bought a new laptop (HP Envy 13) with Windows 10. I have a USB printer (HP LaserJet 1018). When I plug it in, it appears as "unknown device" in Devices and Printers. The troubleshooter shows a message:

which hints at that the problem is not in the printer but in Windows 10 USB printing support, which apparently cannot work with USB 3.0 ports. The laptop has only USB 3.0 ports, so apparently it cannot print at all (I did not try other printers).

Looking for Windows 10 drivers on HP website. The printer is listed as supported and Windows 10 driver is in the list, but instead of a link to the driver their site says that I should use the built-in driver already included with the operating system. It has a link to "more information", which finally sends me back to the same page.

Connecting the printer to another computer with Windows 7 (works like a charm), marking it as shared and connecting to it from the Windows 10 laptop via IP. It does see it but asks to install a driver from file (shows a "choose file" dialog without attempting to use the alleged built-in driver), but as I said HP does not provide any driver file for this printer, suggesting to use Windows 10 built-in driver. In the list of known devices that the installer shows (after syncing with Windows Update) there is no 1018 printer.

I connected the printer to another (actually, newer) laptop with Windows 10. Even though that laptop apparently had the same USB 3.0 (or maybe 3.1) ports, after some maybe 10 minutes Windows suddenly said that the printer was ready, and I could print from that laptop.

So on that new laptop where the printer installed on its own, I searched in files *.inf under C:\Windows\System32\DriverStore\FileRepository (including subdirectories) for the string "1018", which is a part of the model name of my printer, HP LaserJet 1018:

Or maybe I copied that directory to some temporal directory on my old laptop, then used the Add New Printer wizard, chose "I have a disk", and pointed the wizard to the .INF file in the copied directory (probably it can be done with right-clicking on the .INF file and choosing Install).