SSTV decoding results

[W3WTW]

I haven't gotten a good decode since a few versions back. At my location I can typically get a good signal above 30' and am filtering on >20.   Am I missing a setting somewhere?

Thx

[Alex VE3NEA]

No satellites are currently transmitting SSTV. Here is a web page where you can check what satellites are currently active, and what modes they use:

https://www.amsat.org/status/

[W3WTW]

Thank you

[Filippo iz5tep]

Hi Alex, thanks for the change to the RX frequency. Is it possible to activate telemetry and decode SSTV when on this frequency, in my case, the PD120.

In short, we created a CW/SSTV beacon at frequency 432445000. Is it possible to decode the signal? 

Regards, 

iz5tep

--
You received this message because you are subscribed to the Google Groups "SkyRoof" group.
To unsubscribe from this group and stop receiving emails from it, send an email to skyroof+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/skyroof/9f1971c7-de0e-4cb2-85a4-b04a384d0a59n%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Alex VE3NEA]

SkyRoof does not decode terrestrial signals, and decoding them is not in my plans.