Error in the latest revision of IC-9100.json in Skycat

[Glider Pilot]

The latest revision of IC-9100.json appears to have a typo on line 192 position 50 (see below).  There is a ["00"v] that should be ["00"]

 "FM": [ "00", "00" ], "CW-R": [ "00"v ], "RTTY-R": [ "00", "00" ], "DV": [ "00", "00" ],

If you run skycat with the latest revision of IC-9100.json you get the following error:

SkyCat_1.6>skycatd -m 3068 -s 19200 -r com10
skycatd started.
Log level: Warning
Press Ctrl-C to exit.

07:08:34.270 [FTL] Error loading command set 'C:\Users\oalonso\Downloads\SkyCat_1.6\Rigs\IC-9100.json'
Newtonsoft.Json.JsonReaderException: After parsing a value an unexpected character was encountered: v. Path 'duplex.write_tx_mode.messages[2].command_param.values.CW-R[0]', line 192, position 50.

73's de Oscar, N6PAZ

[Alex VE3NEA]

Thank you, fixed now.