problem with GPU support on an NVIDIA quadro K5100M with skanect

[b2unit2]

Scanect says that my NVIDIA quadro K5100M cannot support cuda for the skanect program:

 

Logfile:

WARNING: Could not detect CUDA devices: CUDA driver version is insufficient for CUDA runtime version

WARNING: If you own a NVidia CUDA 2.0 compatible device, make sure your CUDA drivers are installed and up to date.

WARNING: CUDA device specs are NOT enough for GPU fusion, disabled.

 

But it is an high end graphics card, and I am running the latest drivers.

And it is classified as CUDA 3.0

Is this graphix card supported by skanect?

greetings, Rob

[b2unit2]

Is there nobody using this video cart?
Please reply....

[Nicolas Burrus]

Hi,

Could you send use your full log file? On what platform are you using
it? Could you try to update your CUDA drivers?

This card should indeed work fine with Skanect.

> --
> You received this message because you are subscribed to the Google Groups "Skanect" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to skanect+u...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[Nicolas Burrus]

Hi Rob,

You drivers are not the latest ones, you should directly go download
and install the latest driver from NVidia website:
http://www.nvidia.com/Download/index.aspx?lang=en-us .

On Fri, Oct 17, 2014 at 10:51 AM, rob van zeventer
<robvanz...@gmail.com> wrote:
> Nicolas,
>
> Thnx for replying.
> full log file:
> ---------------------
> INFO: Starting Skanect 1.7.0-RC5 (64 bits)
> INFO: Configuration file: C:/Users/Rob van
> Zeventer/AppData/Roaming/ManCTL/Skanect.ini
> INFO: License configuration file: C:/Users/Rob van
> Zeventer/AppData/Roaming/ManCTL/SkanectLicense.ini

> WARNING: Could not detect CUDA devices: CUDA driver version is insufficient
> for CUDA runtime version
> WARNING: If you own a NVidia CUDA 2.0 compatible device, make sure your CUDA
> drivers are installed and up to date.
> WARNING: CUDA device specs are NOT enough for GPU fusion, disabled.

> INFO: No support for Kinect One SDK.
> WARNING: No Kinect for Windows SDK dll found.
> INFO: OpenNI2: Number of devices: 0
> INFO: No support for softkinetic, skipping.
> WARNING: Warning: sensor calibration data is missing.
> INFO: Depth Intrinsics: fx/fy/cx/cy [0.000 | 0.000 | 0.000 | 0.000]
> INFO: Color Intrinsics: fx/fy/cx/cy [0.000 | 0.000 | 0.000 | 0.000]
> ---------------------
>
> also added screenshot of installed driver
> When i go to the Nvidio page to update my driver, it says that i have the
> latest drivers.
>
> i am running skanect on a HP ZBook 17
>
> thnx for looking into this.
>
> greetings, Rob

[Donald Dahl]

I'm having the same problem, 

here's my log file

INFO: Starting Skanect 1.7.0-RC5 (64 bits)

INFO: Configuration file: C:/Users/ddahl.MBSINTL/AppData/Roaming/ManCTL/Skanect.ini

INFO: License configuration file: C:/Users/ddahl.MBSINTL/AppData/Roaming/ManCTL/SkanectLicense.ini

INFO: Number of CUDA devices: 1

INFO: Device 0:  "Quadro FX 5800"  3857Mb / 4096Mb

INFO: Device 0: sm_13 (pre-Fermi), 240 cores

INFO: Device 0: Driver/Runtime ver.6.50/6.0

INFO: CUDA major: 1

WARNING: CUDA device specs are NOT enough for GPU fusion, disabled.

INFO: No support for Kinect One SDK.

INFO: Initializing Kin4Win driver

INFO: Number of Kinect for Windows devices found: 1.

INFO: OpenNI2: Number of devices: 0

INFO: No support for softkinetic, skipping.

WARNING: Warning: sensor calibration data is missing.

INFO: [Kinect 36a4e50] connecting

INFO: Kinect for Windows: initialized successfully

INFO: Kinect for Windows: color stream opened.

INFO: Kinect for Windows: depth stream opened.

WARNING: Kinect for Windows: could not set near mode

WARNING: Kinect for Windows: must be an Xbox Kinect.

INFO: Kinect for Windows: flags set.

Any help is appreciated