Bria Provisioning

[Jimmy]

Im trying to provision Bria 4.0 automatically but does not work... I dont see any service running on 12000 as it states in the wiki.  Has anything changed in 15.10.1

[Michael Picher]

Yes, I think provisioning is HTTPS now.  We did do some work on Bria 4 and cleaned up the vcard contacts.

Mike

On Wed, Dec 30, 2015, 2:55 PM Jimmy <dmano...@gmail.com> wrote:

Im trying to provision Bria 4.0 automatically but does not work... I dont see any service running on 12000 as it states in the wiki.  Has anything changed in 15.10.1

--
You received this message because you are subscribed to the Google Groups "sipxcom-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sipxcom-user...@googlegroups.com.
To post to this group, send email to sipxco...@googlegroups.com.
Visit this group at https://groups.google.com/group/sipxcom-users.
To view this discussion on the web visit https://groups.google.com/d/msgid/sipxcom-users/adb3e7b3-ad16-4d54-ba84-4dd477f9bd9d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Michael Picher, VP of Product Innovation
eZuce, Inc.

300 Brickstone Square

Suite 104

Andover, MA. 01810

O.978-296-1005 X2015 
M.207-956-0262
@mpicher <http://twitter.com/mpicher> 

linkedin
www.ezuce.com

Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee(s) named above. Any dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you. FMS

[Mircea Carasel]

Please check: http://jira.sipxcom.org/browse/SIPX-228

Here is how to provision Jitsi:

How to setup : 
1.Add a Jitsi phone under Devices->Phones.(Enter anything you want as Serial Number) 
2.Add an existing user as a Line on this Jitsi phone. 
3.Send Profiles. 
4.Download Jitsi and install 
5.When(if) prompted at the welcome screen - select to go to Provisioning. 
You will be switched to Options->Advanced->Provisioning. 
6.Check Enable provisioning -> Manual -> "https://ipOrFqdn/jitsiprov/provisioning?username={username}&password={password}" 
Replace "ipOrFqdn" with the UniteMe server ip or fqdn. No need to replace anything else. 
7.Close the settings and restart Jitsi. 
8.Jitsi starts.When prompted,insert the UserID and user password of the user added at step 2. 
Jitsi will load 

If you've already went through the whole provisioning process once but you want to start fresh with a new profile. 
You need to go into Jitsi->Options->Advanced->Provisioning ->and click Forget password. 
Restart Jitsi. 

Mircea

To view this discussion on the web visit https://groups.google.com/d/msgid/sipxcom-users/CAAHujP5drMqoxsG2oW1nq6GL_7ZPKpVO-A7y-BP%3D4SWSdTQ7VQ%40mail.gmail.com.

[Mircea Carasel]

Sorry I missread, the instructions posted are for Jitsi softphone

For Bria, there is no such 12000 port open to the world to serve Bria, please point the wiki page you were following... it probably needs an update

Follow below steps:

1. Download Bria 4

Next move to the Admin Portal. 
2.Add a new Bria device from Phones->Add new phone->Bria 3.x 4.x 
At the mac address field paste whatever you want, make sure to be unique 
Add a line to this device and send profiles. 
3.Back at the Bria softphone , a login screen poppes-up. 
If you skip that,  in order to re-enable it go to Softphone ->Preferences->Application, Enable login screen. 
Exit application get back in,and login screen should be displayed. 
4.Enter login data : 
Profile: Enter your configuration server's details 
Login server : sipxcom_server_fqdn/cmcprov/login 
Username : user id of the user added as a line on the bria phone in sipxcom 
Password : user password of this user (not SIP password) 
Login 

If it does not work, attach sipxconfig.log and any error message bria outlines

Mircea