sipxcom-users

m

In the Rocky Linux 9 project we have done a lot of service and memory management work including

We are finally getting there on the RL9 release, there will be a more comprehensive update when it

dddfdfsrddtrrdtdtdtdtdfdddtd

Thanks! Looks like restarting it on the secondary servers worked. I'll keep that one in mind in

Thank you for bottoming that out! sipX already has the option in the built in SBC to manage this (see

So appreciative the folks at On Relay have adopted this project. Thank you! Paul Herron paul@

Describe your Dhcp setup. What provides DHCP? On that server, describe your SRV records for tcp and

Those settings are found under /etc/sipxpbx/sipxivr/EmailFormats.properties On Oct 20, 2025, at 7:56

Licensed Pharmaceuticals And Psychedelics Online Store Buy the best Pharmaceuticals And Psychedelics

Licensed Pharmaceuticals And Psychedelics Online Store Buy the best Pharmaceuticals And Psychedelics

Licensed Pharmaceuticals And Psychedelics Online Store Buy the best Pharmaceuticals And Psychedelics

Licensed Pharmaceuticals And Psychedelics Online Store Buy the best Pharmaceuticals And Psychedelics

Licensed Pharmaceuticals And Psychedelics Online Store Buy the best Pharmaceuticals And Psychedelics

Hello Roy, You can upgrade an existing 21.04 installation to 24.01 following these simple

We use the built in SBC, since 24.01 with TLS / SRTP enabled. We have tested it towards something

Yes, if you use the built in SBC just create a new SIP trunk under Gateways, deselect Register on

Are you sure it's not a regular phone call ringing a fax number. Those will do that Sent with my

If you do that, then you can add it as a device in sipXcom, configure it, send profile, then go back

Hi Roy, There is a bit of a registration process to obtain stir / shaken certificates from the STI-CA

The sipX project has its roots in Massachusetts and I thought members of this community might find

MWI is normally monitored using SUBSCRIBE / NOTIFY towards the regular SIP URI <extension>@<

Thanks for the suggestion Matt! I think I found the issue, looks like sipXproxy log had a bunch of

Thank you. I set the PBX ip at the public ip. So far I have no more disconnect alarms but it's

Sounds good Ivar, I appreciate you recording it! On Tue, Feb 25, 2025 at 1:42 PM Ivar Plahte <ivar

Thanks guys! Nate had the correct answer with Option 66. I had not setup the TFTP Server setting to

We have patched 24.01 for CentOS7 with an update 7. The only change is an update to the set_le_cert

There are some hazelcast socket errors when you start up there, so wondering if the media service is

Hi Jacob, A natural route for additional softphone support is to integrate WebRTC support with

Glad to hear. Such problems that recovered with reboots used to happen quite a lot with older