IVR testing

[Paul Miller]

Hi,

Is there an example scenario that demonstrates the cmd_DialDigits capability?

 

----------

cmd_DialDigits=041234567;PT=101

 

I do not currently see SP Inspector deluxe (5.54) generating the rtp event messages as I expect.

 

Regards

Paul Miller Senior Solution Architect “How hard can it be.” T  +64 4 802 9606 E  Paul....@spark.co.nz   Boulcott Tower, Level 11, Spark Central, 42-52 Willis Street P O Box 293, Wellington 6011 www.sparknz.co.nz

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.

 

 

[Zarko C]

The following does not work for you?

Zarko

[Paul Miller]

I just used the method you have in your provided example and that worked fine.

I was trying to do play pcap then dial digits, is that also an acceptable way to use the capability?

Thanks

Paul

On 13 March 2018 at 04:39, Zarko C <sipinsp...@gmail.com> wrote:

The following does not work for you?

Zarko

--
To post to this group, send email to sip-in...@googlegroups.com
To unsubscribe from this group, send email to
sip-inspector+unsubscribe@googlegroups.com
http://groups.google.com/group/sip-inspector?hl=en?hl=en