[Switch Sound File Converter Keygen Password
Christel Malden
mSecure is a harder nut to crack (mSecure Version 6.0.8 (896)). The exported csv is a mess since I used a couple of entry types the fields don't line up. It seems to be exported with the name of the field and number coded like "Password8" and "Username7". Also every entry starts with the name and entry number like "Example entry1531018355," and so forth.
I'm wondering when importing the same entry from Lastpass and mSecure. What does 1password do with similar entries? Does it attempt to resolve conflicts or just overwrite? Does it offer any control to the user to resolve?
The converter is trying to convert the credit card's month / year expiration value, but it is seeing the entire string "Expiration Date1111/2024" as being that month / year. Since the mSecure CSV export dos not contain any labels, your data must have that label / value as the date data. And clearly that's isn't a "date", let alone a month / year value.
Would this data have been imported by mSecure from some other password manager, or did you add that? I thought I recall that mSecure5 validated date input, but perhaps it doesn't on importing from another password manager.
Either way, I recently updated some of the date conversion routines to better handle such egregious data (normally I like to know when a password manager can create bogus data so that I get reports like yours).
I just updated the development (not release) version of the suite. Can you retrieve that and give it a try? It's in the folder mrc-converter-suite - development version at top level of the download site. Follow the mrc-converter-suite home link here:
Close your terminal window, toss your existing mrc-converter-suite into the trash, replace it with the unzipped development version I just posted, launch your terminal again, change directories and retry the conversion.
Excellent, I'd be happy to give it a try. The csv file is as exported by mSecure 6. There are no controls provided to alter the export. I haven't tried importing to any other. I'm a bit perturbed that mSecure 6 exports in this fashion, but they may have their reasons. Doesn't make it easy, however.
However, I go to import into a new Test vault and can't seem to import the new file (see snap below). When I select import from the desktop application it only allows me to import directly from Lastpass. This never worked for unknown reasons -- I got it to work from the web interface.
The real problem is with the conversion of mSecure 6 data. Since the mSecure 6 export format seems to labelfield#value pairing for everything. The imported value for some usernames becomes "Username7testuser" for example. Passwords imported look like "Password8BogusPassword" which is not what was intended. The label such as "Password8" needs to be removed and just the remaining part of the string kept for the password.
Oh, that's not good. Their export format has changed. I'll have to take a look. Can I get back to you tomorrow on this? I currently don't have a valid account and their software won't export without one (so I can't create test data).
Thank you for working this! The main entry types/labels that I use are: Login, Computer Login, Credit Card, Serial Number, Secure Note, Account, Prescription, Combination, Frequent Flyer, Bank Accts, Frequent Flyer Hotel, Email Accts.
Somehow along the way there were duplicates created like: Web Logins Duplicate, Credit Card Duplicate, Combinations Duplicate. I believe they are similarly but the fields move around a bit. Other than this, I didn't modify the structure at all just used it.
I'm working first on the stock Templates (and these will map to 1Password "Categories"). I've completed Login, Credit Card, Secure Note, Bank Account. I'll now add the other stock templates you list (Prescription, Combination, Frequent Flyer, Email Account).
For your custom templates, I'll need to know how you want them mapped into 1Password's categories (without this, they will end up as Secure Notes and many will anyway). Your custom templates are: Computer Login, Serial Number, Account, Frequent Flyer Hotel.
The converter currently is matching the field labels within each item to map these into 1Password's field's for a category. So if you've changed those labels, we'll have to add the appropriate pattern into the converter's field label pattern match definition. You'll know this when you examine the results, and we can adjust accordingly.
The Serial # and Reseller fields for your Serial Numbers template does not map naturally to any fields in the Software License category, so they will become custom fields. I don't know what data type your Purchase Date is, and I've presumed it is a Date Field type (which has a date picker and ID value 10 in the CSV export (the middle value in the pipe-separated value, as in labelidvalue). This is important because the date value is in a specific format that gets converted to 1Password's internal representation for date values for date fields. If your Purchase Date is just text, I'll redefine that definition to not attempt to convert this value.
Loaded into 1password and looked pretty reasonable. Didn't look bad at all. Looks like a lot of things turned into Secure Notes, however. Could it be that all the Duplicate types turned into Secure Notes? I'll get back to you on Friday with a better analysis of what happened.
Dup's don't cause incorrect categorization - the category is defined in the CSV, and the converter maps that to a 1Password category where it can. Some mSecure templates don't map naturally, so they may end up as Secure Notes.
I may do some more converting but I think I'm close enough. Now this becomes a manual process of cleaning everything up. I'm now able to see all entries from Lastpass and mSecure6 together in 1password.
I have an triad 24x24 audio matrix switch and an 8 zone triad power amp 100 WPC. I am using 7 of the 8 zones, I have an digital coax line coming from the ea3 to the digital audio inputs on the matrix and a stereo line with rca coming from the ea 3 to the analog audio inputs on the matrix.
Then from the matrix I have red and white rca lines coming from the analog audio output on the matrix going to thw zone inputs on the amp. (Red and white) rca for output 1 on matrix to red and white input on amp. 1 set for each of the 7 zones that are in use.
In composer I used the discover tap ssid for the matrix and just double clicked to add it in my room called "rack". Which I keep hidden on the navigator. Then added the triad 8-zone power amplifier 100 from search.
In connections for the matrix audio: input 1 is binded to ea3 audio out and on matrix audio input 17 for digital coax is binded to ea 3 digital audio out. Lower down; Audio/video outputs I have audio output 1 binded to 8 zone power amp audio input 2 and so on for each auto output. Audio output 2 to 8 zone amp audio input 2....
Problem: let's say I choose the kitchen and hit listen and choose a source and source. On my screen it says it is playing and I can control volume but I hear nothing . Until I add a any other zone to play with it (does not matter what zone) amd when I do, then all the zones come on. Even though the volume shows it is going up and down, every zone is on and stays on the same volume and won't go up or down. I have to turn off the zones or end session.
So I get no sound on 1 zone or choose 2 or more zones and get all 7 on at same time. Also it does not matter where I start. I could be in master bathroom Zone amd start xm radio amd hear nothing until I choose another zone like office and then all 7 zones are on at same sound level and cannot change but on my touch screen or phone app it says it's changing.
Ps I am the dealer and it's my own house and no I have not called c4 yet because I want to be home when I do for obviously reasons. They will probably tell me to try this or want to log onto my system and by the time I get home they are closed. It's Sunday night at 11:45pm and i started this project at 9 am this morning. You can only imagine how crazy I am going right now. Please any suggestions
When you turn just a single zone on it seems like the 12v trigger is not firing from the matrix to the amp. As far as all zones turning on I would double check dip switches on the back of the triad 8 zone amp and make sure all zones are switched to use line not global input, the driver defaults all to use line input. But it sounds like the matrix is not routing audio correctly. When you have time to test, on the system design tab double click the triad 24x24 it should bring up a grid. Turn each zone on one at a time and watch the input to output map. If more outputs are being connect to the given input it may be a binding/routing issue, out of date driver, or matrix fw issue. I never seen this issue myself.
Thank you for the response and yes this is crazy. But when I turn on the 1st zone (does not matter which one it is) yes the amp does come on and all the numbers in blue come up but no sound out of anything until I turn on any other zone. Just 1 zone on and then a second (once again it does not matter which zone) but then all 7 zones are playing at the preset on volume and that's it until I turn off the 2 zones that are on.
For the "Link to global input" dip switches they should all be down. Having The 1st dip switch in the on position makes all outputs use the global input (input 1). You said you have 1 RCA out of the matrix to the amp for each zone (1-7) correct?
Then definitely put all the dip switches in the off position. That explains part of what you saw, still not sure why volume wouldn't of worked for at least one of the zones. Zone 1 the family room should of globally controlled the volume for speakers connected to the amp with current config. Do you have another device that you use the listen function for in your living room / set as audio and audio volume endpoint 1 for that room?
795a8134c1